SPKC1245FL Datasheet, PDF (1/6 Pages) Rectron Semiconductor – SCHOTTKY BARRIER SOLAR RECTIFIER VOLTAGE 45 Volts CURRENT 12 Amperes

SPKC1245FL
SCHOTTKY BARRIER SOLAR RECTIFIER
VOLTAGE 45 Volts CURRENT 12 Amperes
Patent ^{Pending FEATURES}
* Low switching noise
* Low forward voltage drop
* Low thermal resistance
* High current capability
* High surge capabitity
* High reliability
* Ideal for solar panel PV application such as By-Pass diode
MECHANICAL DATA
* Case: ThinPAQ
* Epoxy: Device has UL flammability classification 94V-O
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting position: Any
.886 (22.0)
.787 (20.0)
.282 (7.05)
.273 (6.95)
ThinPAQ
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
SYMBOL
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
VRRM
VRMS
Maximum DC Blocking Voltage
VDC
Maximum DC Forward Current @TL=125^oC(Note 1)
IO
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
Typical Current Square Time
I²T
Operating Temperature Range
Storage Temperature Range
TJ
TSTG
ELECTRICAL CHARACTERISTICS(@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
Maximum Instantaneous Forward
Voltage at 12 A DC
Maximum Average Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 75^oC
@TA = 25^oC
@TA = 75^oC
SYMBOL
V_F
IR
NOTES : 1. Heat-sink mounted 10mm max from body
2. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr.
.007 (0.18)
.003 (0.08)
1.102 (28.0)
1.062 (27.0)
0.95mm
(Max.)
Dimensions in inches and (millimeters)
SPKC1245FL
45
31.5
45
12
300
373.3
175(Tj<200C in Bypass Mode)
-55 to + 175
SPKC1245FL
.55
.47
100
2.5
UNITS
Volts
Volts
Volts
Amps
Amps
A²S
0_C
0_C
UNITS
Volts
uA
mA
2011-06
REV: O