SM4933 Datasheet, PDF (1/2 Pages) Rectron Semiconductor – SURFACE MOUNT GLASS PASSIVATED FAST RECOVERY SILICON RECTIFIER (VOLTAGE RANGE 50 to 600 Volts CURRENT 1.0 Ampere)

RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
SURFACE MOUNT GLASS PASSIVATED
FAST RECOVERY SILICON RECTIFIER
VOLTAGE RANGE 50 to 600 Volts CURRENT 1.0 Ampere
FEATURES
* Fast switching
* Glass passivated device
* Ideal for surface mounted applications
* Low leakage current
* Metallurgically bonded construction
* Mounting position: Any
* Weight: 0.015 gram
MECHANICAL DATA
* Epoxy : Device has UL flammability classification 94V-0
.205 (5.2)
.190 (4.8)
SM4933
THRU
SM4937
MELF
SOLDERABLE
ENDS
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.028 (.60)
.018 (.46)
.106 (2.7)
.095 (2.4)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current TA = 55^oC
Peak Forward Surge Current IFM (surge): 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Thermal Resistance
Typical Junction Capacitance (Note 1)
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
IO
IFSM
(Note 2) RθJL
(Note 3) RθJA
CJ
TJ, TSTG
SM4933
50
35
50
SM4934
100
70
100
SM4935
200
140
200
1.0
30
SM4936
400
280
400
30
75
15
-65 to + 175
SM4937
600
420
600
UNITS
Volts
Volts
Volts
Amps
Amps
0_{C/ W}
0_{C/ W}
pF
0_C
ELECTRICAL CHARACTERISTICS (At TA = 25^oC unless otherwise noted)
CHARACTERISTICS
SYMBOL
Maximum Forward Voltage at 1.0A DC
VF
Maximum Full Load Reverse Current,Full cycle Average at TA = 55^oC
Maximum Average Reverse Current at
@TA = 25^oC
IR
Rated DC Blocking Voltage
@TA = 125^oC
Maximum Reverse Recovery Time (Note 4)
trr
NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC
2. Thermal resistance junction to terminal 6.0mm² copper pads to each terminal.
3. Thermal resistance junction to ambient, 6.0mm² copper pads to each terminal.
4. Test Conditions: IF = 1.0A, VR = 30V.
SM4933
SM4934
SM4935
1.2
50
5.0
100
200
SM4936
SM4937
UNITS
Volts
uAmps
uAmps
uAmps
nSec
2001-4