SLDB101S_10 Datasheet, PDF (1/5 Pages) Rectron Semiconductor – SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere

SLDB101S
THRU
SINGLE-PHASE GLASS PASSIVATED ^SLDB107S
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
FEATURES
* Good for automation insertion
* Surge overload rating - 30 amperes peak
* Ideal for printed circuit board
* Reliable low cost construction utilizing molded
* Glass passivated device
* Polarity symbols molded on body
* Mounting position: Any
* Weight: 0.33 gram
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
resistive or inductive load.
SLDBS
.142 (3.6)
.126 (3.2)
MAX .209 (5.3)
.028 (0.7)
.020 (0.5)
.0039 (0.100)
.0036 (0.092)
.165 (4.2)
.150 (3.8)
MAX .059 (1.5)
.009(0.220)
.007(0.180)
.028 (0.700)
.012 (0.300)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Output Current at TA = 40^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
SYMBOL SLDB101S SLDB102S SLDB103S SLDB104S SLDB105S SLDB106S SLDB107S UNITS
VRRM
50
100
200
400
600
800
1000
Volts
VRMS
35
70
140
280
420
560
700
Volts
VDC
50
IO
100
200
400
600
800
1000
Volts
1.0
Amps
IFSM
30
Amps
Typical Current Squared Time
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
I²t
RqJA
RqJL
TJ,TSTG
3.7
62.5
25
-55 to + 150
A²/S
0_C/W
0_C
ELECTRICAL CHARACTERISTICS (At TA = 25^oC unless otherwise noted)
CHARACTERISTICS
SYMBOL SLDB101S SLDB102S SLDB103S SLDB104S SLDB105S SLDB106S SLDB107S UNITS
Maximum Forward Voltage Drop per Bridge
Element at 1.0A DC
Maximum Reverse Current at Rated
DC Blocking Voltage per element
VF
@TA = 25^oC
@TA = 125^oC
IR
1.1
Volts
5.0
uAmps
0.5
mAmps
Note: 1.”Fully ROHS compliant”,”100% Sn plating(Pb-free).
2. Thermal Resistance: Mounted on PCB.
3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr.
2010-05
REV:B