SF161S Datasheet, PDF (1/3 Pages) Rectron Semiconductor – GLASS PASSIVATED SUPER FAST RECTIFIER VOLTAGE RANGE 50 to 600 Volts CURRENT 16 Amperes

GLASS PASSIVATED SUPER FAST RECTIFIER
VOLTAGE RANGE 50 to 600 Volts CURRENT 16 Amperes
SF161S
THRU
SF167S
FEATURES
* Low switching noise
* Low forward voltage drop
* Low thermal resistance
* High current capability
* Super fast switching speed
* High reliability
* Good for switching mode circuit
MECHANICAL DATA
* Case: D2-PAK molded plastic
* Epoxy: Device has UL flammability classification 94V-O
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting position: Any
* Weight: 1.35 grams
PIN1 PIN2
D2-PAK
.189 (4.80)
.173 (4.40)
.053 (1.35)
.049 (1.25)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.202 (5.13)
.198 (5.03)
.412 (10.46)
.388 (9.86)
.055 (1.40)
.047 (1.20)
.036 (0.91)
.028 (0.71)
PIN 1
PIN 2
.020 (0.50)
.012 (0.30)
HEATSINK
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TC = 100^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 4)
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range
SYMBOL
VRRM
V_RMS
V_DC
IO
IFSM
Rq JA
Rq JC
CJ
TJ, TSTG
SF161S
50
35
50
SF162S
100
70
100
SF163S SF164S
150
200
105
140
150
200
SF165S
300
210
300
SF166S
400
280
400
SF167S
600
420
600
UNITS
Volts
Volts
Volts
16.0
Amps
300
16
1.2
400
-55 to + 150
Amps
0_C/W
pF
0_C
ELECTRICAL CHARACTERISTICS(@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 16.0A DC
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
Maximum Reverse Recovery Time (Note 1)
SYMBOL
V_F
IR
trr
NOTES : 1. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. Suffix "R" for Reverse Polarity.
4. Typical Thermal Resistance : Heat-sink mounted.
5. "Fully ROHS complaint", "100% Sn plating (Pb-free)"
SF161S
SF162S SF163S SF164S SF165S SF166S SF167S
1.0
1.35
1.70
10
500
35
50
UNITS
Volts
mAmps
nSec
2007-3