RS2501M_12 Datasheet, PDF (1/5 Pages) Rectron Semiconductor – SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIERV VOLTAGE RANGE 50 to 1000 Volts CURRENT 25 Ampere

SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 25 Ampere
RS2501M
THRU
RS2507M
FEATURES
* Low leakage
* Low forward voltage
* Mounting position: Any
* Surge overload rating: 300 amperes peak
* Ideal for printed cikcuit boakds
* High forward surge current capability
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
* UL list the recognized component directory, file #E94233
1.193 ( 30.3 )
1.169 ( 29.7 )
RS-25M
.150 ( 3.8 )
.134 ( 3.4 )
.189 ( 4.8 )
.173 ( 4.4 )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.106 (2.7 )
.096 (2.3 )
.087 (2.2 )
.071 (1.8 )
.043 (1.1 )
.035 (0.9 )
.402 (10.2 ).303 (7.7 ).303 (7.7 )
.386 (9.8 ) .287 (7.3 ).287 (7.3 )
.114 (2.9 )
.098 (2.5 )
.031 (0.8 )
.023 (0.6 )
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
SYMBOL
Maximum Recurrent Peak Reverse Voltage
V_RRM
Maximum RMS Voltage
VRMS
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified with heatsink
Current at TC=55^OC
without heatsink
IO
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
Typical Thermal Resistance (Note 1)
Typical Thermal Resistance (Note 1)
R_θJC
R_θJA
Typical Current Squared Time
I2t
Operating Temperature Range
T_J
Storage Temperature Range
TSTG
RS2501M
50
35
50
RS2502M
100
70
100
RS2503M
200
140
200
RS2504M
400
280
400
25
4.3
300
RS2505M
600
420
600
1.0
22
373.3
150
-55 to + 150
RS2506M
800
560
800
RS2507M UNITS
1000 Volts
700
Volts
1000 Volts
Amps
Amps
0_C/W
0_C/W
A2S
0_C
0_C
ELECTRICAL CHARACTERISTICS(@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
SYMBOL RS2501M RS2502M
Maximum Forward Voltage at 12.5A DC
VF
Maximum DC Average Reverse Current at ^{@TA = 25oC}
Rated DC Blocking Voltage
@TA = 125^oC
IR
NOTES : 1. Thermal resistance : Heat-sink case mounted.
2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr.
RS2503M
RS2504M
1.1
5.0
200
RS2505M
RS2506M
RS2507M
UNITS
Volts
uAmps
uAmps
2012-11
REV: D