RS201M_11 Datasheet, PDF (1/5 Pages) Rectron Semiconductor – SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes

SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes
RS201M
THRU
RS207M
FEATURES
* Ideal for printed circuit board
* Mounting position: Any
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
.807 (20.5 )
.768 (19.5 )
RS-2M
.146 (3.7 )
.130 (3.3 )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
resistive or inductive load.
.098 (2.5 )
.083 (2.1)
.043 (1.1 )
.035 (0.9)
.047 (1.2 )
.031 (0.8 )
.024 (0.6 )
.016 (0.4 )
.209 (5.3 )
.193 (4.9 )
.209 (5.3 )
.193 (4.9 )
.209 (5.3 )
.193 (4.9 )
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 105^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Current Squarad Time
Typical Thermal Resistance (Note 1)
Typical Junction Capacitance (Note 3)
SYMBOL
VRRM
V_RMS
V_DC
IO
IFSM
I²T
Rq JC
Rq JA
CJ
RS201M
50
35
50
RS202M
100
70
100
RS203M RS204M RS205M RS206M
200
400
600
800
140
280
420
560
200
400
600
800
RS207M
1000
700
1000
2.0
60
14.9
11
37
15
UNITS
Volts
Volts
Volts
Amps
Amps
A²/Sec
0_C/W
pF
Operating and Storage Temperature Range
TJ, TSTG
-55 to + 150
0_C
ELECTRICAL CHARACTERISTICS(@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 2.0A DC
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
SYMBOL
V_F
IR
RS201M
RS202M RS203M RS204M RS205M RS206M RS207M
1.1
5.0
500
NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted.
2. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
3. Measure at 1 MHz and applied reverse voltage of 4.0 Volts.
4. Available in Halogen-free epoxy by adding suffix -HF after the part nbr.
UNITS
Volts
mAmps
2011-05
REV:B