RS201M Datasheet, PDF (1/2 Pages) Bytes – SINGLE PHASE 2.0 AMP BRIDGE RECTIFIERS

RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Ampere
FEATURES
* Ideal for printed circuit board
* Mounting position: Any
MECHANICAL DATA
* UL listed the recognized component directory, file #E94233
* Epoxy: Device has UL flammability classification 94V-O
.807 (20.5)
.768 (19.5)
RS201M
THRU
RS207M
RS-2M
.146 (3.7)
.130 (3.3)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.098 (2.5)
.083 (2.1)
.043 (1.1)
.035 (0.9)
.047 (1.2)
.031 (0.8)
.024 (0.6)
.016 (0.4)
.209 (5.3) .209 (5.3) .209 (5.3)
.193 (4.9) .193 (4.9) .193 (4.9)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Output Current TA = 50^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction Capacitance (Note1)
Typical Thermal Resistance per leg (NOTE 2)
(NOTE 3)
Operating Temperature Range
Storage Temperature Range
ELECTRICAL CHARACTERISTICS (At TA = 25^oC unless otherwise noted)
SYMBOL
VRRM
VRMS
VDC
IO
IFSM
CJ
RθJA
RθJC
TJ
T S TG
RS201M RS202M RS203M RS204M RS205M RS206M RS207M UNITS
50
100
200
400
600
800 1000 Volts
35
70
140
280
420
560
700 Volts
50
100
200
400
600
800 1000 Volts
2.0
Amps
50
Amps
15
37
11
-55 to + 150
-55 to + 150
pF
0_C/W
0_C
0_C
CHARACTERISTICS
Maximum Forward Voltage Drop per Bridgeat
Element at 2.0A DC
Maximum Reverse Current at Rated
Dc Blocking Voltage per element
@TA = 25^oC
@TA = 100^oC
SYMBOL RS201M RS202M RS203M RS204M RS205M RS206M RS207M UNITS
VF
1.1
Volts
5.0
uAmps
IR
0.5
mAmps
NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts
2. Unit case mounted on 1.6 x 1.6 x 0.06” thick (4.0 x 4.0 x 0.15cm) Al. Plate
3. Units mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm) copper pads and 0.375” (9.5mm) lead length
4. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
2005-3
REV:A