RS101M Datasheet, PDF (1/3 Pages) Rectron Semiconductor – SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere

SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
RS101M
THRU
RS107M
FEATURES
* Low leakage
* Low forward voltage
* Low cost
* Mounting position: Any
RS-1M
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
.582 (14.8)
.559 (14.2)
.146 (3.7)
.130 (3.3)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.043 (0.9)
.035 (0.6)
.024 (0.6)
.016 (0.4)
.165 (4.2) .165 (4.2) .165 (4.2)
.149 (3.8) .149 (3.8) .149 (3.8)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 50^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 1)
Operating and Storage Temperature Range
SYMBOL
VRRM
V_RMS
V_DC
IO
IFSM
Rq JC
Rq JA
TJ, TSTG
RS101M
50
35
50
RS102M RS103M RS104M RS105M RS106M
100
200
400
600
800
70
140
280
420
560
100
200
400
600
800
RS107M
1000
700
1000
UNITS
Volts
Volts
Volts
1.0
Amps
30
15
50
-55 to + 150
Amps
0_C/W
0_C
ELECTRICAL CHARACTERISTICS(@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
SYMBOL RS101M
Maximum Instantaneous Forward Voltage at 1.0A DC
V_F
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
IR
NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted.
2. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
RS102M RS103M RS104M RS105M RS106M RS107M
1.0
2.0
100
UNITS
Volts
mAmps
2006-12