RS1001M_10 Datasheet, PDF (1/5 Pages) Rectron Semiconductor – SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 10 Amperes

SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 10 Amperes
RS1001M
THRU
RS1007M
FEATURES
* Low leakage
* ^{Low forward voltage}
* ^{Mounting position : Any}
* ^{Surge overload rating: 200 Amperes peak}
* ^{Ideal for printed circuit boards}
* MSL: Level 2
MECHANICAL DATA
* UL listed the recognized component directory, file #E94233
* Epoxy: Device has UL flammability classification 94V-O
.995 (25.3)
.983 (24.7)
RS-10M
.189 (4.8)
.173 (4.4)
.150 (3.8)
.134 (3.4)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^OC ambient temperature unless otherwise specified.
resistive or inductive load.
.057 (1.45)
.041 (1.05)
.083 (2.1)
.069 (1.7)
.043 (1.1)
.035 (0.9)
.114 (2.9)
.098 (2.5)
.031 (0.8)
.023 (0.6)
.303 (7.7) .303 (7.7) .303 (7.7)
.287 (7.3) .287 (7.3) .287 (7.3)
Dimensions in inches and (millimeters)
MAXIMUM CHARACTERISTICS ( @ TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
RS1001M RS1002M RS1003M RS1004M RS1005M RS1006M RS1007M UNITS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
VRRM
VRMS
50
100 200 400
600
800 1000 Volts
35
70
140 280
420
560
700 Volts
Maximum DC Blocking Voltage
VDC
50
100 200 400
600
800 1000 Volts
Maximum Average Forward Rectified Output Current
at Tc=100 degree with heatsink
IO
10
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
200
Amps
Typical Current Square Time
I²T
165.9
A²S
Typical Thermal Resistance from junction to ambient
Typical Thermal Resistance from junction to case
RΘJA
RΘJC
22
O_C/W
1.0
Operating and Storage Temperature Range
TJ,TSTG
-55 to + 150
O_C
ELECTRICAL CHARACTERISTICS ( @ TA = 25^oC unless otherwise noted )
CHARACTERISTICS
SYMBOL RS1001M RS1002M RS1003M RS1004M RS1005M RS1006M RS1007M UNITS
Maximum Forward Voltage Drop per element at 5.0A DC
VF
Maximum Reverse Current at Rated
DC Blocking Voltage per element
TA=25 ^OC
IR
TC=100 ^OC
Note: 1."Fully ROHS compliant", "100% Sn plating (Pb-free)".
2. Available in Halogen-free epoxy by adding suffix -HF after the part nbr.
1.1
Volts
5.0
µAmps
0.2
mAmps
2010-11
REV: A