RBU801M_13 Datasheet, PDF (1/6 Pages) Rectron Semiconductor – SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER

RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Amperes
RBU801M
THRU
RBU807M
FEATURES
* Low leakage
* Low forward voltage
* Mounting position: Any
* Surge overload rating: 200 amperes peak
* Ideal for printed circuit boards
* High forward surge current capability
MECHANICAL DATA
* UL listed the recognized component directory, file #E94233
* Epoxy: Device has UL flammability classification 94V-O
.880 (22.3)
.860 (21.8)
.160 (4.1)
.140 (3.5)
.512 (13.0)
.100 (2.54)
.085 (2.16)
RBU
.140 (3.56)
.130 (3.30)
.085 (2.16)
.075 (1.90)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.210 (5.33)
.190 (4.83)
.080 (2.03)
.065 (1.65)
.022 (0.56)
.018 (0.46)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Output Current at Tc = 75^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load
Typical Thermal Resistance
(Note 1)
Operating and Storage Temperature Range
SYMBOL
VRRM
RBU801M RBU802M RBU803M RBU804M RBU805M RBU806M RBU807M UNITS
50
100
200
400
600
800
1000 Volts
VRMS
VDC
35
70
140
280
420
560
700 Volts
50
100
200
400
600
800
1000 Volts
IO
8.0
Amps
IFSM
200
Amps
RθJA
RθJC
TJ,TSTG
26
3.4
-55 to + 150
0_{C/ W}
0_C
ELECTRICAL CHARACTERISTICS (At TA = 25^oC unless otherwise noted)
CHARACTERISTICS
SYMBOL RBU801M RBU802M RBU803M RBU804M RBU805M RBU806M RBU807M UNITS
Maximum Forward Voltage Drop per element at 8.0A DC
VF
1.1
Volts
Maximum Reverse Current at Rated
@TA = 25^oC
IR
DC Blocking Voltage per element
@TA = 125^oC
5.0
uAmps
0.5
mAmps
NOTE: 1. Units mounted in free air, no heatsink on P.C.B., 0.5x0.5” (12x12mm) copper pads, 0.375” lead length.
2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
2013-04
REV: B