English
Language : 

RBU801M_10 Datasheet, PDF (1/6 Pages) Rectron Semiconductor – SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Amperes
RBU801M
THRU
RBU807M
SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Amperes
FEATURES
* Low power loss, high efficiency
* Low leakage
* Low forward voltage drop
* High current capability
* High speed switching
* High surge capabitity
* High reliability
* Guard ring construction on dice
* Anti-ESD
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
* Mounting position: Any
* Weight: 0.01 gram (Approx.)
* Flat lead frame
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
resistive or inductive load.
RBU
Please See Page 3 for Dimension
MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TC = *75 oC (Note 4)
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Current Squarad Time
Typical Thermal Resistance (Note 1)
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
RBU801M RBU802M RBU803M RBU804M RBU805M RBU806M RBU807M
50
100
200
400
600
800
1000
35
70
140
280
420
560
700
50
100
200
400
600
800
1000
UNITS
Volts
Volts
Volts
IO
8.0
Amps
IFSM
I2t
Rq JC
Rq JA
TJ, TSTG
200
165.9
3.4
26
-55 to + 150
Amps
A2/Sec
0C /W
0C
ELECTRICAL CHARACTERISTICS(@TA=25 OC unless otherwise noted)
CHARACTERISTICS
SYMBOL RBU801M RBU802M RBU803M RBU804M RBU805M RBU806M RBU807M UNITS
Maximum Instantaneous Forward Voltage at 8.0A DC
VF
Maximum DC Reverse Current
@TA = 25oC
at Rated DC Blocking Voltage
@TA = 125oC
IR
1.1
Volts
2.0
uAmps
500
NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted.
2. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
3. Equivalent to Vishay's GBU8 Series.
4. "*" Heat Sink Temperature.
5. Available in Halogen-free epoxy by adding suffix -HF after the part nbr.
2010-05
REV:C