RBU1001M_10 Datasheet, PDF (1/5 Pages) Rectron Semiconductor – SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 10.0 Amperes

RBU1001M
THRU
SINGLE-PHASE GLASS PASSIVATED
RBU1007M
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 10.0 Amperes
FEATURES
* Low leakage
* Low forward voltage
* Surge overload rating: 200 amperes peak
* Mounting position: Any
RBU
MECHANICAL DATA
* ^{UL listed the recognizde component directory file # E252754}
* Epoxy: Device has UL flammability classification 94V-O
.880 (22.3)
.860 (21.8)
.160 (4.1)
.140 (3.5)
.512 (13.0)
.100 (2.54)
.085 (2.16)
.140 (3.56)
.130 (3.30)
.085 (2.16)
.075 (1.90)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
resistive or inductive load.
.210 (5.33)
.190 (4.83)
.080 (2.03)
.065 (1.65)
.022 (0.56)
.018 (0.46)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TC = *100 ^oC (Note 4)
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
SYMBOL
VRRM
V_RMS
V_DC
IO
IFSM
RBU1001M RBU1002M RBU1003M RBU1004M RBU1005M RBU1006M RBU1007M UNITS
50
100
200
400
600
800
1000
Volts
35
70
140
280
420
560
700
Volts
50
100
200
400
600
800
1000
Volts
10.0
Amps
200
Amps
Typical Current Squared Time
I²t
165.9
A²/S
Isolation Voltage of case
Typical Thermal Resistance (Note 1)
Operating and Storage Temperature Range
VISO
Rq JC
Rq JA
TJ, TSTG
1600
2.3
26
-55 to + 150
VAC
0_C/W
0_C
ELECTRICAL CHARACTERISTICS(@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
SYMBOL RBU1001M RBU1002M RBU1003M RBU1004M RBU1005M RBU1006M RBU1007M
Maximum Instantaneous Forward Voltage at 5.0A DC
V_F
1.1
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
IR
5.0
100
NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted.
2. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
3. Equivalent to Vishay's GBU10 Series.
4. "*" Heat Sink Temperature.
5. Available in Halogen-free epoxy by adding suffix -HF after the part nbr.
UNITS
Volts
uAmps
2010-05
REV:B