P6KE510A Datasheet, PDF (1/4 Pages) Rectron Semiconductor – GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE

GPP TRANSIENT VOLTAGE SUPPRESSOR
600 WATT PEAK POWER 5.0 WATTS STEADY STATE
P6KE510A
FEATURES
* Plastic package has underwriters laboratory
* Glass passivated chip construction
* 600 watt surage capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time
DO-15
1.0 (25.4)
MIN.
.034 (0.9)
.028 (0.7) ^DIA.
.300 (7.6)
.230 (5.8)
.140 (3.6)
.104 (2.6) ^DIA.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load,
For capacitive load, derate current by 20%.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
Peak Power Dissipation at TA = 25^OC,TP = 1mS (Note 1)
Steady State Power Dissipation at TL = 75^OC lead length,
.375" (9.5 mm) (Note 2)
Peak forward surge current, 8.3ms single half sine wave superimpose
on rated load (JEDEC METHOD) (Note 3)
Maximum instantaneous forward voltage at 50A for unidirectional
only
Operating and Storage Temperature Range
SYMBOL
PPPM
PM(AV)
IFSM
VF
TJ, TSTG
VALUE
Minimum 600
5.0
100
5.0
-55 to + 150
NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25^oC per Fig.2.
2. Mounted on 0.2 X 0.2” (5.0 X 5.0mm) copper pad to each terminal.
3. Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum.
4. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
UNITS
W
W
A
V
0_C
2007-6