P6KE Datasheet, PDF (1/5 Pages) Pan Jit International Inc. – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State)

RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
GPP TRANSIENT VOLTAGE SUPPRESSOR
600 WATT PEAK POWER 1.0 WATT STEADY STATE
FEATURES
* Plastic package has underwriters laboratory
* Glass passivated chip construction
* 600 watt surage capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time
TVS
P6KE
SERIES
DO-15
Ratings at 25 ^oC ambient temperature unless otherwise specified.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load,
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA suffix for types P6KE6.8 thru P6KE400
Electrical characteristics apply in both direction
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
Peak power dissipation with a 10/1000uS (NOTES 1, FIG.1)
Steady state power dissipation at TL = 75^oC lead lengths,
.375” ( 9.5 mm ) ( NOTES 2 )
SYMBOL
PPPM
PD
VALUE
Minimum 600
5.0
Peak forward surge current, 8.3ms single half sine wave-
IFSM
superimposed on rated load( JEDEC METHOD ) ( NOTES 3 )
Maximum instantaneous forward voltage at 50A for
unidirectional only ( NOTES 4 )
VF
100
3.5/5.0
Operating and storage temperature range
TJ, TSTG
-65 to + 175
NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25^oC per Fig.2.
2. Mounted on copper pad area of 1.6 X 1.6”( 40X40 mm) per Fig. 5
3. Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minute maximum.
4. VF = 3.0V max. for devices of V(BR) < 200V and VF = 5.0 Volts for devices of V(BR) > 200V.
UNITS
Watts
Watts
Amps
Volts
0_C
1998-8
Back