ISF161C Datasheet, PDF (1/2 Pages) Rectron Semiconductor – GLASS PASSIVATED SUPER FAST RECTIFIER VOLTAGE RANGE 50 to 600 Volts CURRENT 16 Amperes

RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
GLASS PASSIVATED SUPER FAST RECTIFIER
VOLTAGE RANGE 50 to 600 Volts CURRENT 16 Amperes
ISF161C
THRU
ISF167C
FEATURES
* Low switching noise
* Low forward voltage drop
* Low thermal resistance
* High current capability
* Super fast switching speed
* High reliability
* Good for switching mode circuit
MECHANICAL DATA
* Case: ITO-220 molded plastic
* Epoxy: Device has UL flammability classification 94V-O
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting position: Any
* Weight: 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
ITO-220
.114(2.9)
.098(2.5)
.406(10.3)
.382(9.7)
.138(3.5)
.122(3.1)
.185(4.7)
.169(4.3)
.134(3.4)
.110(2.8)
.602(15.3)
.579(14.7)
.071(1.8)
.055(1.4)
.055(1.4)
.039(1.0)
.035(0.9)
.020(0.5)
.108(2.75)
.091(2.30)
.154 (3.9)
.138 (3.5)
.531(13.5)
.492(12.5)
.031(0.8)
.016 (0.4)
.114(2.9)
.098(2.5)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TC = 125^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
IO
ISF161C ISF162C ISF163C ISF164C ISF165C ISF166C ISF167C
50
100
150
200
300
400
600
35
70
105
140
210
280
420
50
100
150
200
300
400
600
UNITS
Volts
Volts
Volts
16.0
Amps
IFSM
RθJC
CJ
TJ, TSTG
150
3
50
30
-55 to + 150
Amps
0_{C/ W}
pF
0_C
ELECTRICAL CHARACTERISTICS (At TA = 25^oC unless otherwise noted)
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 8.0A DC
Maximum DC Reverse Current
@TC = 25^oC
at Rated DC Blocking Voltage
@TC = 100^oC
Maximum Reverse Recovery Time (Note 1)
SYMBOL
VF
IR
trr
NOTES : 1. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. Suffix “A” =Common Anode.
ISF161C ISF162C ISF163C ISF164C ISF165C ISF166C ISF167C
1.0
1.35
1.70
10
500
35
50
UNITS
Volts
uAmps
nSec
2003-1