HSM101 Datasheet, PDF (1/5 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SURFACE MOUNT HIGH EFFICIENCY RECTIFIER

SURFACE MOUNT GLASS PASSIVATED
HIGH EFFICIENCY SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
FEATURES
* Glass passivated device
* Ideal for surface mounted applications
* Low leakage current
* Metallurgically bonded construction
* Mounting position: Any
* Weight: 0.015 gram
MECHANICAL DATA
Discontinued
* Epoxy : Device has UL flammability classification 94V-0
HSM101
THRU
HSM108
MELF
DISCONTINUED-
"This series is replaced by the HFM10X series that meets to the same
fit and function parameters and share the same solder pad layout.
The HFM10X series is preferred for error-free vacuum pick-up and
PCB assembly.
.205 ( 5.2 )
.190 ( 4.8 )
SOLDERABLE
ENDS
.024 ( 0.6 )
.016 ( 0.4 )
.106 ( 2.7 )
.095 ( 2.4 )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
SYMBOL HSM101 HSM102 HSM103 HSM104 HSM105
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
VRRM
50
VRMS
35
100
200
300
400
70
140
210
280
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 50^OC
VDC
50
100
200
300
400
IO
1.0
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
30
Typical Junction Capacitance (Note 2)
CJ
Operating Temperature Range
TJ
15
150
Storage Temperature Range
TSTG
-55 to + 150
HSM106
600
420
600
HSM107
800
490
800
12
HSM108 UNITS
1000 Volts
700 Volts
1000 Volts
Amps
Amps
pF
0_C
0_C
ELECTRICAL CHARACTERISTICS(@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
SYMBOL HSM101 HSM102 HSM103 HSM104 HSM105
Maximum Instantaneous Forward Voltage at 1.0A DC
V_F
1.0
1.3
Maximum Full Load Reverse Current, Full
cycle Average TA =55^OC
50
IR
Maximum Average Reverse Current
@TA = 25^oC
5
at Rated DC Blocking Voltage
@TA = 125^oC
100
Maximum Reverse Recovery Time (Note 4)
trr
50
NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
3. Test Conditions: IF= 0.5A, IR= -1.0A, IRR= -0.25A.
HSM106
HSM107
1.7
75
HSM108 UNITS
Volts
mA
mA
mA
nSec
2007-5