English
Language : 

HL101W Datasheet, PDF (1/4 Pages) Rectron Semiconductor – SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
SURFACE MOUNT SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
HL101W
THRU
HL107W
FEATURES
* Ideal for surface mounted applications
* Low leakage current
* Metallurgically bonded construction
* Mounting position: Any
* Weight: 0.078 gram
MECHANICAL DATA
* Epoxy : Device has UL flammability classification 94V-0
SMX
.110 (2.79)
.086 (2.18)
.209 (5.31)
.185 (4.70)
.011 (0.28)
.007 (0.18)
.180 (4.57)
.160 (4.06)
.071 (1.80)
.051 (1.30)
.091 (2.31)
.067 (1.70)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25OC ambient temperature unless otherwise specfied.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.059 (1.50)
.035 (0.89)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)
RATINGS
SYMBOL
Maximum Recurrent Peak Reverse Voltage
VRRM
Maximum RMS Voltage
VRMS
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current
at Lead Temperatu re
IO
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 1)
Typical Thermal Resistance (Note 1)
Typical Junction Capacitance (Note 2)
Operating Temperature Range
Storage Temperature Range
IFSM
RqJA
RqJL
CJ
TJ
TSTG
HL101W
50
35
50
HL102W
100
70
100
HL103W
200
140
200
HL104W
400
280
400
1.0
HL105W
600
420
600
HL106W
800
560
800
HL107W
1000
700
1000
UNITS
Vol ts
Vol ts
Vol ts
Amps
35
100
60
15
150
-55 to + 150
30
Amps
0C/W
0C/W
pF
0C
0C
ELECTRICA L CHARACTERISTIC S(@TA=25 OC unless otherwise noted)
CHARACTERISTICS
SYMBOL HL101W
Maximum Instantaneous Forward Voltage at 1.0A DC
VF
Maximum Full Load Reverse Current,
Full cycle Average at TA=75OC
Maximum Average Reverse Current
at Rated DC Blocking Voltage
@TA = 25oC
@TA = 125oC
IR
NOTES : 1. Thermal Resistance :Mounted on PCB.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. "Fully ROHS compliant","100% Sn plating (Pb-free)".
HL102W
HL103W
HL104W
1.05
30
HL105W
HL106W
HL107W UNITS
Vol ts
uA
500
nA
100
uA
2008-7
 ▷