HFM101L Datasheet, PDF (1/5 Pages) Rectron Semiconductor – SURFACE MOUNT GLASS PASSIVATED HIGH EFFICIENCY SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere

SURFACE MOUNT GLASS PASSIVATED
HIGH EFFICIENCY SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
FEATURES
* Glass passivated device
* Ideal for surface mounted applications
* Low leakage current
* Metallurgically bonded construction
* Mounting position: Any
* Weight: 0.057 gram
HFM101L
THRU
HFM108L
SMAL
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
0.067 (1.70 )
0.051 (1.29 )
0.180 ( 4.57 )
0.160 ( 4.06 )
0.110 ( 2.79 )
0.086 ( 2.18 )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
0.067 ( 1.70 )
0.063 ( 1.60 )
0.059 ( 1.50 )
0.035 ( 0.89 )
0.012 ( 0.305 )
0.006 ( 0.152 )
0.209 ( 5.31 )
0.185 ( 4.70 )
0.008 ( 0.203 )
0.004 ( 0.102 )
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
SYMBOL HFM101L HFM102L HFM103L HFM104L HFM105L
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
300
400
Maximum RMS Voltage
VRMS
35
70
140
210
280
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 50^OC
VDC
50
100
200
300
400
IO
1.0
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
30
Typical Thermal Resistance (Note 1)
Rq_JL
27
Typical Thermal Resistance (Note 1)
Rq_JA
75
Typical Junction Capacitance (Note 2)
CJ
Operating Temperature Range
TJ
15
150
Storage Temperature Range
TSTG
-55 to + 150
HFM106L
600
420
600
HFM107L HFM108L UNITS
800
1000 Volts
490
700 Volts
800
1000 Volts
Amps
Amps
0_C/W
0_C/W
12
pF
0_C
0_C
ELECTRICAL CHARACTERISTICS(@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
SYMBOL HFM101L HFM102L HFM103L HFM104L HFM105L
Maximum Instantaneous Forward Voltage at 1.0A DC
V_F
1.0
1.3
Maximum Full Load Reverse Current, Full
cycle Average TA =55^OC
50
IR
Maximum Average Reverse Current
@TA = 25^oC
2
at Rated DC Blocking Voltage
@TA = 125^oC
100
Maximum Reverse Recovery Time (Note 4)
trr
50
NOTES : 1. Thermal Resistance : Mounted on PCB.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
4. Test Conditions: IF= 0.5A, IR= -1.0A, IRR= -0.25A.
HFM106L
HFM107L HFM108L UNITS
1.7
Volts
mA
mA
mA
75
nSec
2006-12