FR801K Datasheet, PDF (1/3 Pages) Rectron Semiconductor – FAST RECOVERY GLASS PASSIVATED RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Amperes

FAST RECOVERY GLASS PASSIVATED RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Amperes
FR801K
THRU
FR807K
FEATURES
* Fast switching
* Low leakage
* Low forward voltage drop
* High current capability
* High surge capability
* High reliability
MECHANICAL DATA
* Case: D-PAK molded plastic
* Epoxy: Device has UL flammability classification 94V-O
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting position: Any
* Weight: 0.33 grams
.264 (6.7)
.248 (6.3)
.217 (5.5)
.201 (5.1)
PIN3
D-PAK
.098 (2.5)
.083 (2.1)
.024 (0.6)
.016 (0.4)
PIN1
PIN2
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYP .091
(2.30)
.183 (4.65)
.179 (4.55)
.031 (0.8)
.016 (0.4)
PIN 1
TYP .020
(0.50)
PIN 3
PIN 2
HEATSINK
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 75 ^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 1)
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range
SYMBOL
VRRM
V_RMS
V_DC
IO
IFSM
Rq JC
Rq JA
CJ
TJ, TSTG
FR801K
50
35
50
FR802K
100
70
100
FR803K
200
140
200
FR804K FR805K
400
600
280
420
400
600
FR806K
800
560
800
FR807K
1000
700
1000
8.0
200
3
16
50
-55 to + 150
UNITS
Volts
Volts
Volts
Amps
Amps
0_C/W
pF
0_C
ELECTRICAL CHARACTERISTICS (@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 8.0A DC
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
Maximum Reverse Recovery Time (Note 3)
SYMBOL
V_F
IR
trr
FR801K
NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. Test conditions: IF= 0.5A, IR= -0.1A, IRR=-0.25A.
4. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
5. Suffix "R" for Reverse Polarity.
6. Suffix "S" for D2-PAK Pkg.
FR802K FR803K
150
FR804K FR805K
1.3
2
150
250
FR806K FR807K
500
UNITS
Volts
uAmps
nSec
2006-12