FM4001W Datasheet, PDF (1/2 Pages) Rectron Semiconductor – SURFACE MOUNT SILICON RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere)

RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
SURFACE MOUNT SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
FM4001W
THRU
FM4007W
FEATURES
* Ideal for surface mounted applications
* Low leakage current
* Metallurgically bonded construction
* Mounting position: Any
* Weight: 0.057 gram
MECHANICAL DATA
* Epoxy : Device has UL flammability classification 94V-0
SMX
.110 (2.79)
.086 (2.18)
.209 (5.31)
.185 (4.70)
.067 (1.70)
.051 (1.30)
.011 (0.28)
.007 (0.18)
.180 (4.57)
.160 (4.06)
.091 (2.31)
.067 (1.70)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.059 (1.50)
.035 (0.89)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current at TA = 75^oC
Peak Forward Surge Current IFM(surge): 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Thermal Resistance
Typical Junction Capacitance (Note 1)
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
IO
FM4001W FM4002W FM4003W FM4004W FM4005W FM4006W FM4007W _UNITS
50
100
200
400
600
800 1000 Volts
35
70
140
280
420
560
700 Volts
50
100
200
400
600
800 1000 Volts
1.0
Amps
IFSM
30
Amps
(Note 2) RθJL
(Note 3) RθJA
CJ
TJ, TSTG
60
100
15
-65 to + 175
0_{C/ W}
0_{C/ W}
pF
0_C
ELECTRICAL CHARACTERISTICS (At TA = 25^oC unless otherwise noted)
CHARACTERISTICS
SYMBOL
Maximum Forward Voltage at 1.0A DC
VF
Maximum Full Load Reverse Current,
Full cycle Average at TA=75^oC
Maximum DC Average Reverse Current at
@TA = 25^oC
IR
Rated DC Blocking Voltage
@TA = 125^oC
NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC
2. Thermal resistance junction to terminal 6.0mm² coppeer pads to each terminal.
3. Thermal resistance junction to ambient, 6.0mm² coppeer pads to each terminal.
FM4001W FM4002W FM4003W FM4004W FM4005W FM4006W FM4007W U N I T S
1.1
Volts
30
uAmps
5.0
uAmps
50
uAmps
1998-8