FM201C Datasheet, PDF (1/3 Pages) Rectron Semiconductor – SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes

RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
SURFACE MOUNT
GLASS PASSIVATED SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes
FM201C
THRU
FM207C
FEATURES
* Glass passivated device
* Ideal for surface mounted applications
* Low leakage current
* Metallurgically bonded construction
* Mounting position: Any
* Weight: 0.24 gram
MECHANICAL DATA
* Epoxy : Device has UL flammability classification 94V-0
0.125 (3.17)
0.115 (2.92)
DO-214AB
0.245 (6.22)
0.220 (5.59)
0.280 (7.11)
0.260 (6.60)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
0.103 (2.62)
0.079 (2.06)
0.060 (1.52)
0.030 (0.76)
0.012 (0.305)
0.006 (0.152)
0.320 (8.13)
0.305 (7.75)
0.008 (0.203)
0.004 (0.102)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 75 ^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermaesistance
Typical Junction Capacitance (Note 1)
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
FM201C FM202C FM203C FM204C FM205C FM206C FM207C
50
100 200 400 600 800 1000
35
70
140 280 420 560 700
50
100 200 400 600 800 1000
UNITS
Volts
Volts
Volts
IO
2.0
Amps
IFSM
(Note 2)RθJL
(Note 3)RθJA
CJ
TJ,TSTG
50
20
50
30
-55 to + 150
Amps
0_{C/ W}
0_{C/ W}
pF
0_C
ELECTRICAL CHARACTERISTICS (At TA = 25^oC unless otherwise noted)
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 2.0A DC
Maximum Average Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 125^oC
SYMBOL
VF
IR
FM201C FM202C FM203C FM204C FM205C FM206C FM207C
1.1
5.0
125
UNITS
Volts
uAmps
uAmps
NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
2. Thermal resistance junction to terminal, 5X5mm² copper pads to each terminal.
3. Thermal resistance junction to ambient, 5X5mm² copper pads to each terminal.
2002-6