FM201 Datasheet, PDF (1/2 Pages) Rectron Semiconductor – SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes)

RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
SURFACE MOUNT
GLASS PASSIVATED SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes
FM201
THRU
FM207
FEATURES
* Glass passivated device
* Ideal for surface mounted applications
* Low leakage current
* Metallurgically bonded construction
* Mounting position: Any
* Weight: 0.098 gram
MECHANICAL DATA
* Epoxy : Device has UL flammability classification 94V-0
0.083 (2.11)
0.077 (1.96)
DO-214AA
0.155 (3.94)
0.130 (3.30)
0.180 (4.57)
0.160 (4.06)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
0.096 (2.44)
0.084 (2.13)
0.060 (1.52)
0.030 (0.76)
0.012 (0.305)
0.006 (0.152)
0.220 (5.59)
0.205 (5.21)
0.008 (0.203)
0.004 (0.102)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 75 ^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermaesistance
Typical Junction Capacitance (Note 1)
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
IO
FM201 FM202 FM203 FM204 FM205 FM206 FM207
50
100 200 400 600 800 1000
35
70
140 280 420 560 700
50
100 200 400 600 800 1000
UNITS
Volts
Volts
Volts
2.0
Amps
IFSM
(Note 2)RθJL
(Note 3)RθJA
CJ
TJ,TSTG
70
20
50
30
-65 to + 175
Amps
0_{C/ W}
0_{C/ W}
pF
0_C
ELECTRICAL CHARACTERISTICS (At TA = 25^oC unless otherwise noted)
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 2.0A DC
Maximum Average Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
SYMBOL
VF
IR
FM201 FM202 FM203 FM204 FM205 FM206 FM207
1.1
5.0
50
NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
2. Thermal resistance junction to terminal, 5X5mm² copper pads to each terminal.
3. Thermal resistance junction to ambient, 5X5mm² copper pads to each terminal.
UNITS
Volts
uAmps
uAmps
2001-4