FM120W Datasheet, PDF (1/6 Pages) Rectron Semiconductor – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 to 200 Volts CURRENT 1.0 Ampere
FM120W
THRU
FM1200W
FEATURES
* Low switching noise
* Low forward voltage drop
* High current capability
* High switching capability
* High surge capabitity
* High reliability
SMX
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: Device has UL flammability classification 94V-O
* Lead: MIL-STD-202E method 208C guaranteed
* Metallurgically bonded construction
* Mounting position: Any
* Weight: 0.09 gram
.110 (2.79)
.086 (2.18)
.209 (5.31)
.185 (4.70)
.067 (1.70)
.051 (1.30)
.011 (0.28)
.007 (0.18)
.180 (4.57)
.160 (4.06)
.091 (2.31)
.067 (1.70)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.059 (1.50)
.035 (0.89)
Dimens ions in inches a nd (millimeters )
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
SYMBOL FM120W FM130W FM140W FM150W FM160W FM180W FM1100W FM1150W FM1200W UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
20
30
40
50
60
80
100
150
200 Volts
Maximum RMS Voltage
VRMS
14
21
28
35
42
56
70
105
140 Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at Derating Case Temperature
VDC
20
30
40
50
60
80
100
150
200 Volts
IO
1.0
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
40
Amps
Typical Thermal Resistance (Note 1)
Typical Thermal Resistance (Note 1)
Rθ_JA
Rθ_JL
85
0_C/W
25
0_C/W
Typical Junction Capacitance (Note 2)
CJ
110
pF
Operating Temperature Range
TJ
150
0_C
Storage Temperature Range
TSTG
-55 to + 150
0_C
ELECTRICAL CHARACTERISTICS(@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
SYMBOL FM120W FM130W FM140W FM150W FM160W FM180W FM1100W FM1150W FM1200W UNITS
Maximum Instantaneous Forward Voltage at 1.0A DC
V_F
.55
Maximum Average Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
IR
.70
0.2
2
.85
Volts
mA
mA
NOTES : 1. Thermal Resistance : Mounted on PCB.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
2006-11
3. Also available in DO-214AA (SMB).
4. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.