EMD1S Datasheet, PDF (1/5 Pages) Rectron Semiconductor – SINGLE-PHASE GLASS PASSIVATED MINI SUPER FAST SURFACE MOUNT BRIDGE RECTIFIER

SINGLE-PHASE GLASS PASSIVATED
MINI SUPER FAST SURFACE MOUNT BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 200 Volts CURRENT 0.5 Ampere
EMD1S
THRU
EMD4S
FEATURES
* Surge overload rating - 20 amperes peak
* Ideal for printed circuit board
* Reliable low cost construction utilizing molded
* Glass passivated device
* Polarity symbols molded on body
* Mounting position: Any
* Weight: 0.5 gram
MD-S
MECHANICAL DATA
1
* Epoxy: Device has UL flammability classification 94V-O
2
3
4
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
0.028(0.9)
0.020(0.5)
0.108(2.74)
0.092(2.34)
0.193(4.9)
0.177(4.5)
.004(0.10) MAX.
0.106(2.7)
0.091(2.3)
0.193(4.9)
0.177(4.5)
0.014(0.35)
0.006(0.15)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Output Current at TA =30^OC
-on glass-epoxy P.C.B. (Note 2)
-on aluminum substrate (Note 3)
SYMBOL
VRRM
VRMS
VDC
IO
EMD1S
50
35
50
EMD2S
100
70
100
EMD3S
150
105
150
0.5
0.8
EMD4S
200
140
200
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction Capacitance (Note 4)
Operating and Storage Temperature Range
IFSM
CJ
TJ,TSTG
20
15
-55 to + 150
ELECTRICAL CHARACTERISTICS (At TA = 25^oC unless otherwise noted)
CHARACTERISTICS
SYMBOL
EMD1S
EMD2S
EMD3S
EMD4S
Maximum Forward Voltage Drop per Bridge
Element at 0.5A DC
VF
1.05
Maximum Reverse Current at Rated
DC Blocking Voltage per element
@TA = 25^oC
@TA = 125^oC
IR
10
0.5
Maximum Reverse Recovery Time (Note 5)
trr
50
Note: 1.”Fully ROHS compliant”,”100% Sn plating(Pb-free).
2. On glass-epoxy P.C.B. mounted on 0.05 X 0.05" (1.3 X 1.3mm) pads.
3. On aluminum substrate P.C.B. with an area of 0.8 X 0.8 X 0.25" (20 X 20 X 6.4mm) mounted on 0.05 X 0.05" (1.27 X 1.27mm) solder pad.
4. Measure at 1MHz and applied reverse voltage of 4.0 volts.
5. Test Condition : IF=0.5A, IR= -1.0A,IRR= -0.25A.
UNITS
Volts
Volts
Volts
Amps
Amps
pF
0_C
UNITS
Volts
mAmps
mAmps
nS
2007-08