EFM301B Datasheet, PDF (1/5 Pages) Rectron Semiconductor – SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER VOLTAGE RANGE 50 to 600 Volts CURRENT 3.0 Amperes

SURFACE MOUNT GLASS PASSIVATED
SUPER FAST SILICON RECTIFIER
VOLTAGE RANGE 50 to 600 Volts CURRENT 3.0 Amperes
EFM301B
THRU
EFM307B
FEATURES
* Glass passivated device
* Ideal for surface mounted applications
* Low leakage current
* Metallurgically bonded construction
* Mounting position: Any
* Weight: 0.098 gram
MECHANICAL DATA
* Epoxy : Device has UL flammability classification 94V-0
DO-214AA
0.083 (2.11)
0.077 (1.96)
0.180 (4.57)
0.160 (4.06)
0.155 (3.94)
0.130 (3.30)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
0.096 (2.44)
0.084 (2.13)
0.060 (1.52)
0.030 (0.76)
0.012 (0.305)
0.006 (0.152)
0.220 (5.59)
0.205 (5.21)
0.008 (0.203)
0.004 (0.102)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 55^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range
SYMBOL EFM301B EFM302B EFM303B EFM304B EFM305B EFM306B EFM307B UNITS
VRRM
50
VRMS
35
VDC
50
100
150
200
300
70
105
140
210
100
150
200
300
400
600
Volts
280
420
Volts
400
600
Volts
IO
3.0
Amps
IFSM
CJ
TJ, TSTG
125
50
30
-55 to + 150
Amps
pF
0_C
ELECTRICAL CHARACTERISTICS(@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
SYMBOL EFM301B EFM302B EFM303B EFM304B EFM305B EFM306B EFM307B UNITS
Maximum Instantaneous Forward Voltage at 3.0A DC
VF
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@T_A = 25^oC
@T_A = 100^oC
IR
Maximum Reverse Recovery Time (Note 1)
trr
0.95
1.25
5.0
100
35
1.50
Volts
uAmps
50
nSec
NOTES :
1. Reverse Recovery Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A
2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts
3. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
2007-3