EFM201L Datasheet, PDF (1/5 Pages) Rectron Semiconductor – SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER VOLTAGE RANGE 50 to 600 Volts CURRENT 2.0 Ampere

SURFACE MOUNT GLASS PASSIVATED
SUPER FAST SILICON RECTIFIER
VOLTAGE RANGE 50 to 600 Volts CURRENT 2.0 Ampere
EFM201L
THRU
EFM207L
FEATURES
* Glass passivated device
* Ideal for surface mounted applications
* Low leakage current
* Metallurgically bonded construction
* Mounting position: Any
* Weight: 0.098 gram
MECHANICAL DATA
* Epoxy : Device has UL flammability classification 94V-0
SMBL
0.083 (2.11)
0.077 (1.96)
0.180 (4.57)
0.160 (4.06)
0.155 (3.94)
0.130 (3.30)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
0.085 (2.15)
0.061 (1.55)
0.060 (1.52)
0.030 (0.76)
0.012 (0.305)
0.006 (0.152)
0.220 (5.59)
0.205 (5.21)
0.008 (0.203)
0.004 (0.102)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 55^oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 4)
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range
SYMBOL
VRRM
VRMS
VDC
IO
EFM201L EFM202L EFM203L EFM204L EFM205L EFM206L EFM207L UNITS
50
100
150
200 300
400 600
Volts
35
70
105
140 210
280 420
Volts
50
100
150
200 300
400 600
Volts
2.0
Amps
IFSM
RqJA
RqJL
CJ
TJ, TSTG
75
75
75
20
25
30
20
-55 to + 150
Amps
0_C/W
pF
0_C
ELECTRICAL CHARACTERISTICS(@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage at 2.0A DC
VF
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@T_A = 25^oC
@T_A = 100^oC
IR
Maximum Reverse Recovery Time (Note 1)
trr
NOTES :
1. Reverse Recovery Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A
2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts
3. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
4. Thermal Resistance : Mounted on PCB.
EFM201L EFM202L EFM203L EFM204L EFM205L EFM206L EFM207L UNITS
0.95
1.25
1.50 Volts
5.0
mAmps
100
35
50
nSec
2006-12