5KP Datasheet, PDF (1/4 Pages) Surge Components – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 to 110 Volts

RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
GPP TRANSIENT VOLTAGE SUPPRESSOR
5000 WATT PEAK POWER 5.0 WATT STEADY STATE
FEATURES
* Plastic package has underwriters laboratory
* Glass passivated chip construction
* 5000 watt surage capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time
TVS
5KP
SERIES
R-6
Ratings at 25 ^oC ambient temperature unless otherwise specified.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load,
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA suffix for types 5KP5.0 thru 5KP110
Electrical characteristics apply in both direction
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
Peak Pulse Power Dissipation with a 10/1000uS
waveform (Note 1, FIG.1)
Peak Pulse Current with a 10/1000uS waveform (Note 1, Fig. 3)
Steady State Power Dissipation at TL = 75^oC lead lengths
0.375” (9.5mm) (Note 2)
Peak Forward Surge Current, 8.3ms single half sine wave-
superimposed on rated load( JEDEC METHOD ) (Note 3)
Instantaneous Forward Voltage at 100A, (Note 3)
Operating and Storage Temperature Range
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VF
TJ, TSTG
VALUE
Minimum 5000
SEE TABLE 1
8.0
400
3.5
-55 to + 175
NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25^oC per Fig.2.
2. Mounted on copper pad area of 0.8 X 0.8” ( 20 X 20mm ) per Fig. 5
3. Measured on 8.3mS single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
UNITS
Watts
Amps
Watts
Amps
Volts
0_C
1998-8
Back