HMC586 Datasheet, PDF (8/9 Pages) –

Evaluation PCB
v03.0514
HMC586LC4B
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 4 - 8 GHz
List of Materials for Evaluation PCB 108648 ^[1]
Item
Description
J1
PCB Mount SMA RF Connector, Johnson
J2
PCB Mount SMA Connector, SRI
J3
DC Header
C1
1000 pF Capacitor, 0402 Pkg.
C2
4.7 µF Capacitor, Tantalum
U1
PCB ^[2]
HMC586LC4B VCO
108646 Eval Board
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed ground paddle should
be connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
5
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]