RTS_10 Datasheet, PDF (1/4 Pages) Recom International Power – 2 Watt SMD Single & Dual Output

Features
Unregulated
Converters
● 1kVDC and 3kVDC Isolation Options
● Approved for Medical Applications
● Suitable for Automated Assembly
● High Power Density
● Optional Continuous Short Circuit Protection
● Efficiency to 85 %
● RoHS 5/6 Conform
Description
Compared to standard 2 Watt packages, space savings of 80% and 77% respectively are achieved by these RTS & RTD
2 Watts SMD-Miniature DC/DC Converters. They have been specifically designed for applications where board space is
at a premium since these 2 Watt converters have only a slightly larger foot print than conventional 1 Watt converters.
With efficiencies up to 85%, external cooling is not needed, as the full output power is available over the operating
temperature range -40°C to +85°C. All converters have an I/O-Isolation of 1kVDC, or optionally 3kV, making them
suitable for many industrial and medical applications.
Selection Guide
Part
Number
SMD
(3kV)
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(mA)
Efficiency
(%)
RTS**-xx3.3 (H)
5, 12, 15, 24
3.3
606
70-75
RTS**-xx05 (H)
5, 12, 15, 24
5
400
80-85
RTS**-xx09 (H)
5, 12, 15, 24
9
222
80-85
RTS**-xx12 (H)
5, 12, 15, 24
12
167
80-85
RTS**-xx15 (H)
5, 12, 15, 24
15
133
80-85
RTS**-xx24 (H)
5, 12, 15, 24
24
83
80-85
RTD**-xx05 (H)
5, 12, 15, 24
±5
±200
70-75
RTD**-xx09 (H)
5, 12, 15, 24
±9
±111
75-78
RTD**-xx12 (H)
5, 12, 15, 24
±12
±83
75-83
RTD**-xx15 (H)
5, 12, 15, 24
±15
±66
75-85
RTD**-xx24 (H)
5, 12, 15, 24
±24
±42
xx = Input Voltage. Other input and output voltage combinations available on request.
* add Suffix “P” for Continuous Short Circuit Protection, e.g. RTS-0505/P, RTD-0505/HP
* add suffix -R for tape&reel packing e.g. RTS-0505-R. For more details see Tapes Section.
78-85
Case and Pinning Options (note restrictions on /H option)
RTS** : ** without marking denotes 5 pins out of 8 fitted (includes /H option)
** with marking 8 denotes 8 pins out of 8 fitted (/H option not available)
RTD** : ** without marking denotes 6 pins out of 10 fitted (includes /H option)
** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available)
Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.2%/1% of Vin max.
Load Voltage Regulation
(10% to 100% full load)
3.3V output types
5V output type
9V, 12V, 15V, 24V output types
20% max.
15% max.
10% max.
Output Ripple and Noise (20MHz limited)
150mVp-p max.
Operating Frequency
20kHz min. / 50kHz typ. / 85kHz max.
Efficiency at Full Load
No Load Power Consumption
RTS typ.
RTD typ.
70% min. / 80% typ.
124mW min. / 186mW typ. / 350mW max.
159mW min. / 192mW typ. / 350mW max.
cont.
www.recom-international.com
REV:0/2010
ECONOLINE
DC/DC-Converter
2 Watt
SMD
Single &
Dual Output
RoHS
2002/95/EC
5/6
EN-60950-1 Certified
(All Suffixes)
EN-60601-1 Certified
(Suffix H3)
RTS-RTD
Refer to Application Notes
Refer to Application Notes
E-49