RSE Datasheet, PDF (1/5 Pages) Recom International Power – 2:1 Wide Input Range

Features
Regulated
Converters
• 2:1 Wide Input Range
• 2kVDC/1 Second Isolation
• -40°C To +75°C Operating Temperature @ Full Load
• Industry Standard Pinout (SIP8)
• EN/UL62368, UL60950, CB Report (pending)
• Low Cost
DC/DC Converter
RSE
Description
The RSE is a low cost isolated, regulated and short-circuit protected DC/DC converter designed for
industrial applications. A compact SIP8 case size, 2:1 input, 2kVDC isolation and a wide operating
temperature range of -40°C to +75°C without derating makes the RSE series ideal for industrial,
transport and general-purpose on-board 5V power supplies. Industrial Class A EMC levels can be met
with a simple Pi-filter and the converters come with a three year warranty.
2 Watt
SIP8
3^{3 YEAR}
warranty
Single Output
Selection Guide
Part
Number
nom. Input
Voltage
[VDC]
Input Current
@ full load
[mA]
Output
Voltage
[VDC]
Output
Current
[mA]
Efficiency
typ. ⁽¹⁾
[%]
max. Capacitive
Load ⁽²⁾
[µF]
RSE-0505S/H2
4.5 - 9
526
5
400
76
6800
RSE-2405S/H2
18 - 36
103
5
400
80
6800
Notes:
Note1: Efficiency is tested at nominal input and full load at +25°C ambient
Note2: Max. cap load is tested at nominal input and full resistive load
Specifications (measured @ ta= 25°C, nominal Vin, full load unless otherwise specified)
BASIC CHARACTERISTICS
Parameter
Internal Input Filter
Input Voltage Range
Maximum Reverse Voltage
Input Surge Voltage
Quiescent Current
Start-up time
Rise time
Hold-up time
Internal Operating Frequency
Minimum Load
Output Ripple and Noise ⁽³⁾
ON/OFF CTRL ⁽⁴⁾
Input Current of CTRL Pin
Standby Current
Condition
5VDC
nom. Vin= _24VDC
100ms max
nom. Vin=
5VDC
24VDC
5VDC
nom. Vin= _24VDC
20MHz BW, 0-100% load
DC-DC ON
DC-DC OFF
5V VCTRL
3.3V VCTRL
Min.
4.5VDC
18VDC
130kHz
0%
Typ.
5VDC
24VDC
15VDC
50VDC
40mA
3mA
500µs
450µs
10µs
Max.
capacitor
9VDC
36VDC
0VDC
75mVp-p
Open or 0V<Vr<0.8VDC
2V<Vr<6VDC
15mA
10mA
0.75mA 1.5mA
Notes:
Note3: Measurements are made with a 0.1µF MLCC across output (low ESR)
Note4: Please refer to „Application and Installation“
continued on next page
www.recom-power.com
REV.: 1/2017
E224736
UL62368-1 certified
C22.2 No. 62368-1-14 certfied
UL60950 (pending)
C22.2 No. 60950-1-07 (pending)
IEC/EN62368-1 (pending)
EN55022/55024 compliant
CB Report
ECO-1