RP75H-RW Datasheet, PDF (1/15 Pages) Recom International Power – 4:1 Wide Input Range

Features
Regulated
Converters
• 4:1 Wide Input Range
• 3kVAC Reinforced Insulation for 110Vin
2.25kVDC Basic Insulation for 24Vin & 48Vin
• Efficiency up to 91%
• No Minimum Load Required
• UL60950-1, EN50155 & IEC/EN60950-1 Certified
DC/DC Converter
RP75H-RW
Description
The half-brick RP75H series DC/DC converters are designed for railway rolling stock and high voltage battery
applications. Each series has three 4:1 input voltage range options to cover all input voltages from 9VDC up
to 160VDC with isolated and regulated 5V to 48VDC outputs. The converters have high efficiencies and metal
baseplates to permit a wide operating temperature range from -40°C to +85°C (when mounted on a suitable
heatsink). The case is fitted with threaded inserts to allow secure mounting to the PCB or bulkhead for use in
high shock and vibration environments. The converters are EN50155, UL60950 and IEC/EN60950 certified.
The RP75H-RW series have a three year warranty.
75 Watt
Half Brick
3^{3 YEAR}
warranty
Single Output
Selection Guide
Part Number
Input
Output Output
Voltage Range Voltage Current
[VDC]
[VDC] [mA]
RP75H-2405SRW 9-36
5 15000
RP75H-2412SRW 9-36
12 6300
RP75H-2415SRW 9-36
15 5000
RP75H-2424SRW 9-36
24 3200
RP75H-2448SRW 9-36
48 1600
RP75H-4805SRW 18-75
5 15000
RP75H-4812SRW 18-75
12 6300
RP75H-4815SRW 18-75
15 5000
RP75H-4824SRW 18-75
24 3200
RP75H-4848SRW 18-75
48 1600
RP75H-11005SRW 43-160
5 15000
RP75H-11012SRW 43-160
12 6300
RP75H-11015SRW 43-160
15 5000
RP75H-11024SRW 43-160
24 3200
RP75H-11048SRW 43-160
48 1600
Input⁽¹⁾
Current
[mA]
3551
3579
3551
3678
3678
1736
1750
1755
1818
1839
749
755
749
775
775
Output
Power
[W]
75
75
75
75
77
75
75
75
75
77
75
75
75
75
77
Efficiency⁽¹⁾
typ.
[%]
88
88
88
87
87
90
90
89
88
87
91
91
91
90
90
Max. Capacitive
Load
[µF]
30000
5250
3330
1330
330
30000
5250
3330
1330
330
30000
5250
3330
1330
330
Notes:
Note1: Efficiency is tested by nominal Vin, full load and at 25°C.
E196683
EN50155 Certified
IEC/EN60950-1 Certified
UL60950-1 Certified
Model Numbering
RP75H-__ __SRW/_ _
Input Voltage
Package⁽³⁾
Output Voltage
CTRL Logic⁽²⁾
Single
Ordering Examples
RP75H-2405SRW/N = 24V Input, 5V Output, Single, Neg. CTRL function
RP75H-11012SRW/P = 110V Input, 12V Output, Single, Pos. CTRL function
RP75H-11012SRW/P-HC = 110V Input, 12V Output, Single, Pos. CTRL function, with premounted Heat-sink
Notes:
Note2: standard part is with suffix “P” for positive logic (1=ON, 0=OFF)

or add suffix “N” instead for negative logic (0=ON, 1=OFF)
Note3: add suffix “-HC” for premounted Heat-sink

(compatible with all other suffixes)
www.recom-power.com
REV.: 1/2016
PB-1