RP20-FR Datasheet, PDF (1/8 Pages) Recom International Power – DC/DC Converter

Features
Regulated
Converters
• Wide 4:1 Input Voltage Range
• 1.6kVDC Isolation
• Efficiency up to 89%
• Six-Sided Continuous Shield
• EN50155, UL60950 Certified
DC/DC Converter
RP20-FR
Description
The RP20-FR series wide range input DC/DC converters are certified to UL60950-1 and cUL 60950-1.
This makes them ideal for all telecom and industrial applications where approved safety standards are
required. The 110VDC input versions have been especially designed for railway applications.
20 Watt
2“ x 1“
3^{3 YEAR}
warranty
Single & Dual
Output
Selection Guide
Part Number
Input
Voltage Range
[VDC]
RP20-243.3SFR^(2,3)
9-36
RP20-2405SFR^(2,3)
9-36
RP20-2412SFR^(2,3)
9-36
RP20-2415SFR^(2,3)
9-36
RP20-483.3SFR^(2,3)
18-75
RP20-4805SFR^(2,3)
18-75
RP20-4812SFR^(2,3)
18-75
RP20-4815SFR^(2,3)
18-75
RP20-1103.3SFR^(2,3)
43-160
RP20-11005SFR^(2,3)
43-160
RP20-11012SFR^(2,3)
43-160
RP20-11015SFR^(2,3)
43-160
RP20-2412DFR^(2,3)
9-36
RP20-2415DFR^(2,3)
9-36
RP20-4812DFR^(2,3)
18-75
RP20-4815FDFR^(2,3)
18-75
RP20-11012DFR^(2,3)
43-160
RP20-11015DFR^(2,3)
43-160
Output
Voltage
[VDC]
3.3
5
12
15
3.3
5
12
15
3.3
5
12
15
±12
±15
±12
±15
±12
±15
Output
Current
[mA]
4500
4000
1670
1330
4500
4000
1670
1330
4500
4000
1670
1330
±833
±667
±833
±667
±833
±667
Input⁽¹⁾
Current
[mA]
728
947
938
945
364
473
469
467
159
209
207
206
947
937
473
468
207
204
Efficiency⁽¹⁾
typ.
[%]
85
88
89
88
85
88
89
89
85
87
88
88
88
89
88
89
88
89
Max. Capacitive
Load
[µF]
7000
5000
850
700
7000
5000
850
700
7000
5000
850
700
±500
±350
±500
±350
±500
±350
Notes:
Note1: at nominal input voltage and full load
E196683
Model Numbering
RP20-__ __ _FR/_ _
Input Voltage
Output Voltage
Package⁽³⁾
CTRL Logic⁽²⁾
Single or Dual
Ordering Examples
RP20-2405SFR/P = 24V Input, 5V Output, Positive Logic CTRL pin and Trim pin fitted
RP20-4812DFR/N-HC = 48V Input, ±12V Output, Negative Logic CTRL pin, with fitted Heat-sink
RP20-2405SFR/XC = 24V Input, 5V Output, no CTRL pin and Trim pin fitted
Notes:
Note2: standard part is with suffix “P” for positive logic (1=ON, 0=OFF) and trim pin

or add suffix “N” instead for negative logic (0=ON, 1=OFF) and trim pin

or add suffix “XC” instead for no CTRL pin (0=ON, 1=OFF) and trim pin
Note3: add suffix “-HC” for premounted Heat-sink with clamps
www.recom-power.com
REV.: 0/2016
EN50155 Certified
UL60950 Certified
CSA C22.2 No.601.1 Certified
PD-1