RP100-483305DS Datasheet, PDF (1/2 Pages) Recom International Power – POWERLINE - DC/DC - CONVERTER

POWERLINE - DC/DC-Converter
H-Series, 100 Watt (Dual Isolated Outputs)
Features
● Independently Regul. 5V & 3.3V,
5V & 2.5V, or 3.3V & 2.5V Outp.
● 36–75 VDC Input (48V Nominal)
● 100W Continuous Ouput Power
● Efficiency up to 84% (Typ.)
● Remote On/Off Control
● Built-in EMI Suppression Filter
● Fixed Operating Frequency
● Under-Voltage Lockout
● Over-Voltage Shutdown
● Short Circuit Protection
● 1500 VDC I/O Isolation
Selection Guide 48V Input Types
Part Number
Output
Voltage
RP100-483305DS V1
V2
RP100-482505DS V1
V2
RP100-482533DS V1
V2
(VDC)
5
3.3
5
2.5
3.3
2.5DC
Output
Max.
(A)
1
0
1
0
1
0
Current
Max.
(A)
20
25
20
25
20
25
Output
Voltage
Tolerance
±1.0%
±1.5%
±1.0%
±1.5%
±1.0%
±1.5%
Ripple &
Noise
(mVp-p)
100
100
100
100
100
100
Line
Load
Regulation Regulation
±0.2%
±0.2%
±0.2%
±0.2%
±0.2%
±0.2%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
36-75VDC (48V nom.)
Input/Output Isolation
1500 VDC, I/O, 1 Min.
Continuous Output Power
100W max.
Base-Plate Temperature
+100 max.: internal thermal shutdown circuit., automatic recovery
Output Voltage Adjustment
Outputs V1 & V2 each adjustable by ±10%
Short Circuit Protection
Under-Voltage Protection
Over-Voltage Protection
Transient Response
Frequency of Operation
Efficiency (at nominal input voltage, full load)
Remote Shutdown
Ripple and Noise (20MHz BW )
Automatic recovery
Lockout activated at 34V–35.5V input, automatic recovery. With 2V-3V hysteresis (typ.)
5V output – shutdown at 6.5V, typ.; 3.3V output – shutdown at 3.9V typ.;
2.5V output – shutdown at 3.2V, typ. Reset at Vin = 0V
200%µ S recovery after half-load to full load step. Change to
within 1% of the regulation hand with no more than 5% deviation
300kHz, fixed
84% typ.
CMOS and open-collector TTL compatible: ON = 2.4V to Vin max.; Off = 0.8V or less
See table above
Line Regulation, HL-LL
±0.2%
Load regulation (100% to 10% full load)
±0.5%
Temperature Coefficient
±0.02%/ºC
Transient Response Recovery Time (25% load step change)
500µ s
Transient Voltage Peak Deviation
300mV, max.
Switching Frequency
300kHz, typ.
Operating Temperature Range
-40ºC to +100ºC (base plate)
Temperature Coefficient (over operating temperature range)
±0.02%
Case Temperature
100°C
Case Material
Aluminium base plate
Dimensions
57.91 x 60.96 x 12.70 mm
www.recom-international.com
August 2002
PO 73