RP10-AW Datasheet, PDF (1/7 Pages) Recom International Power – 10 Watt Single & Dual Output

Features
Regulated
Converters
• 4:1 Wide Input Voltage Range
• 1.6kVDC Isolation
• UL Certified
• Efficiency up to 91%
• Six-Sided Continuous Shield
• No Minimum Load Required
DC/DC Converter
RP10-AW
Description
The RP10-AW series are wide input voltage range 1”x1” power DC/DC converters. Despite their small
size, the RP10-AW converters are fully specified devices with built-in Class B EMC filters, no minimum
load, 1600VDC isolation, under-voltage lockout and low ripple/noise figures. The outputs are fully pro-
tected against short circuits, overcurrent and overvoltage and can be trimmed over a +/-10% range.
The RP10-AW series will find many uses in applications where board space is at a premium as no
external components are required.
Selection Guide
Part Number
RP10-243.3SAW^(2,3)
RP10-2405SAW^(2,3)
RP10-2412SAW^(2,3)
RP10-2415SAW^(2,3)
RP10-2424SAW^(2,3)
RP10-483.3SAW^(2,3)
RP10-4805SAW^(2,3)
RP10-4812SAW^(2,3)
RP10-4815SAW^(2,3)
RP10-4824SAW^(2,3)
RP10-2405DAW^(2,3)
RP10-2412DAW^(2,3)
RP10-2415DAW^(2,3)
RP10-4805DAW^(2,3)
RP10-4812DAW^(2,3)
RP10-4815DAW^(2,3)
Input
Voltage Range
[VDC]
9-36
9-36
9-36
9-36
9-36
18-75
18-75
18-75
18-75
18-75
9-36
9-36
9-36
18-75
18-75
18-75
Output
Voltage
[VDC]
3.3
5
12
15
24
3.3
5
12
15
24
±5
±12
±15
±5
±12
±15
Output
Current
[mA]
3000
2000
830
670
416
3000
2000
830
670
416
±1000
±416
±333
±1000
±416
±333
Input⁽¹⁾
Current
[mA]
485
479
461
460
462
243
239
231
233
231
479
467
468
239
234
234
Efficiency⁽¹⁾
typ.
[%]
85
87
90
91
90
85
87
90
90
90
87
89
89
87
89
89
Max. Capacitive
Load
[µF]
3500
2500
430
350
125
3500
2500
430
350
125
±1440
±250
±180
±1440
±250
±180
10 Watt
1“x1“
3^{3 YEAR}
warranty
Single & Dual
Output
Notes:
Note1: at nominal input voltage and full load.
Model Numbering
RP10-__ __ _AW/_ _
Input Voltage
Output Voltage
Single or Dual
Package⁽³⁾
CTRL Logic⁽²⁾
Ordering Examples
RP10-2405SAW/P = 24V Input, 5V Output, Positive Logic CTRL pin and Trim pin fitted
RP10-4805DAW/XC-HC = 48V Input, ±5V Output, without CTRL pin, with fitted Heat-sink
RP10-2415SAW/N = 24V Input, 5V Output, Negative Logic CTRL pin and Trim pin fitted
Notes:
Note2: standard part is with suffix “P” for positive logic (1=ON, 0=OFF) and trim pin

add suffix “N” instead for negative logic (0=ON, 1=OFF) and trim pin

or add suffix “XC” instead for no CTRL pin
Note3: add suffix “-HC” for premounted Heat-sink with clamps
www.recom-power.com
REV.: 0/2016
UL60950-1 Certified
E196683
PD-1