REDIN45 Datasheet, PDF (1/6 Pages) Recom International Power – 45 Watt DIN-Rail Power Supply

Features
• Universal AC Input (85-264VAC)
• Long 7 Year Warranty
• Protections: SCP, OVP, OCP, OTP
• 100% Full Load burn-in test
• DC OK Indicator LED with Relay Contacts
• cooling by free air convection, 5000m operation
• UL, CSA & CE certified with CB Report
AC/DC Converter
REDIN45
Description
This DIN-rail mounted power supply uses high reliability components to give a long, trouble-free life.The
power supply can be end mounted to save space or side mounted for use in low-profile cabinets. Relay
contacts simplify DC OK monitoring and the units can deliver 60W start-up power. The REDIN series is
fully certified for industrial use and carries a 7-year warranty.
Selection Guide
Part
Number
Input
Voltage Range
(VAC)
REDIN45-12 85-264
REDIN45-24 85-264
Output
Voltage
(VDC)
12
24
Output
Trimming Voltage
(VDC)
12-15
24-28
Rated
Current
(A)
3.75
1.875
Efficiency
typ.
(%)
85
86
Max.
Capacitive Load
(µF)
18800
4700
45 Watt
DIN-Rail
Power
Supply
YEAR
7
warranty
Specifications (measured at TA= 25°C, 230VAC, full load and after warm up)
BASIC CHARACTERISTICS
Parameter
Condition
Input Voltage Range
all operating conditions
max. Input Voltage
max. 1 second
Min.
85VAC
Typ.
Max.
264VAC
300VAC
375VDC
Output Voltage Adjustment
(Factory Setting) ⁽¹⁾
12Vout
24Vout
12-15VDC (12V±5%)
24-28VDC (24V±5%)
Input Current
full load, 115VAC
full load, 230VAC
1.35A
0.75A
Inrush Current
cold start at 25°C, 115VAC
cold start at 25°C, 230VAC
40A
60A
No Load Power Consumption
Start Up time
Rise time
Hold-up time
Input Frequency Range
Operating Frequency Range
Efficiency
Output Ripple and Noise ⁽²⁾
standard (with Relay)
/NR option (no Relay)
cold start, 230VAC
cold start, 230VAC
full load, 115VAC
full load, 230VAC
12Vout
24Vout
<1000mW
<500mW
500ms
1000ms
20ms
20ms
50ms
47Hz
63Hz
65kHz
see Selection Guide
60mVp-p
75mVp-p
Over Load
all operating conditions
140% for 5 seconds max.
E224736
CB-Report
UL-60950-1 Certified
UL-508 Certified
IEC-60950-1 Certified
EN-60715 Compliant
EN-50022 Compliant
CSA C22.2 No. 60950-1-07 Certified
Notes:
Note1: For more details refer to Vadj. Derating Graph
Note2: Ripple and Noise are measured at 20MHz bandwidth by using a 12” twisted pair-wire terminated with 0.1µF &
47µF parallel capacitor.
www.recom-power.com
continued on next page
REV.: 3/2016
Refer to Applications Notes
PA-1