REC10-M Datasheet, PDF (1/2 Pages) Recom International Power – 10 Watt Single & Dual Output

Features
Regulated
Converters
● 10W in 2” x 1” Package
● 2kVDC and 3kVDC Isolation Options
● 2:1 or 4:1 Input Voltage Range
● Continuous Short Circuit Protection
(power limiting)
● Synchronous Rectification on all Del outputs
● Full SMD internal design
● Remote Control Pin
● Efficiency to 87%
Description
The REC10-xxxxS_D/M -series offer single and dual regulated outputs in a 2”x1” package with
2kVDC or 3kVDC isolation options and are suitable for higher power industrial applications. Re-
mote on/off control is standard. The converters can deliver 150% rated power for short periods
of time to cope with applications with large capacitive loads or high start up currents.
Selection Guide
Part
Number
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(mA)
REC10-xx3.3S/H*/M
9-18, 18-36, 36-75 3.3
2000
REC10-xx05S/H*/M
9-18, 18-36, 36-75 5
2000
REC10-xx12S/H*/M
9-18, 18-36, 36-75 12
833
REC10-xx15S/H*/M
9-18, 18-36, 36-75 15
667
REC10-xx05D/H*/M
9-18, 18-36, 36-75 ±5 ±1000
REC10-xx12D/H*/M
9-18, 18-36, 36-75 ±12 ±416
REC10-xx15D/H*/M
9-18, 18-36, 36-75 ±15 ±333
REC10-xx3.3SZ/H*/M
9-36, 18-75
3.3
2000
REC10-xx05SZ/H*/M
9-36, 18-75
5
2000
REC10-xx12SZ/H*/M
9-36, 18-75
12
833
REC10-xx15SZ/H*/M
9-36, 18-75
15
667
REC10-xx05DZ/H*/M
9-36, 18-75
±5 ±1000
REC10-xx12DZ/H*/M
9-36, 18-75
±12 ±416
REC10-xx15DZ/H*/M
9-36, 18-75
±15 ±333
* Standard is /H2 for 2kVDC isolation,
use /H3 for 3kVDC Isolation
2:1
xx = 9-18Vin = 12,
xx = 18-36Vin = 24,
xx = 36-75Vin = 48
Efficiency Max. Cap.
(typ.) Load
(%)
83-84 2200µF
86-87 2200µF
85-86 2200µF
85-86 2200µF
82-83 ±1000µF
85-86 ±1000µF
85-86 ±1000µF
82 2200µF
86 2200µF
85 2200µF
86 2200µF
82 ±1000µF
85 ±1000µF
86 ±1000µF
4:1
xx = 9-36Vin = 24,
xx = 18-75Vin = 48
ECONOLINE
DC/DC-Converter
with 3 year Warranty
10 Watt
2” x 1”
Single & Dual
Output
RoHS
2011/65/EU
6/6
E-224736
EN-60950-1 Certified
EN-60601-1 Certified
UL-60950-1 Certified
REC10/M
Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up)
Input Voltage Range
2:1 or 4:1
Input Filter
PI Network
Output Voltage Accuracy (the Output 3.3V is ±1.2% max.)
±1.0% max.
Line Voltage Regulation
±0.3% max.
Load Voltage Regulation
Single
±0.5% max.
(25% to 100% full load )
Dual
±1.2% max.
Cross Regulation (100%: 25% to 100% full load )
±5% max.
Output Ripple and Noise (with 100n output capacitor and 20MHz BW)
100mVp-p max.
Start-up time (Nom. Vin at 100% Load)
25ms typ.
Operating Frequency (Full Load)
300kHz typ.
Efficiency (Nom. Vin at 100% Load)
see Selection Guide
Minimum Load
0%
Input Surge Voltage (100ms max.)
12V Input
36VDC
24V Input
50VDC
48V Input
100VDC
continued on next page
**Any data referred to in this datasheet are of indicative nature
and based on our practical experience only. For further details,
please refer to our Application Notes.
Refer to Application Notes
E-166
REV: 0/2015
www.recom-power.com