RACD60_11 Datasheet, PDF (1/4 Pages) Recom International Power – 60 Watt PFC Single Output

Features
LED DRIVER
Selection Guide
● 60W Class II AC-DC LED Power Supply
● Dual Mode CV or CC Output
● Power Factor Corrected
● Universal Input Voltage Range
● User Adjustable Current Limit (/OF)
● Thermal Feedback Dimming (/TOF)
● Waterproof Enclosure (/IP67)
● cUL/UL8750 Certified, CE Marked
● High Efficiency
● Long 5 Year Warranty
LIGHTLINE
AC/DC-Converter
with 5 year Warranty
60 Watt PFC
Single Output
Part
Number
RACD60-4200/OF*
RACD60-xxxx/IP67
Output
Output
Preset Efficiency Output
Voltage Range Current Range Current (230VAC) Power
(min - max) (min - max) Limit Typ. Range
11 - 13.5V 3570 - 4200mA 4.2A 85% 40-60W
11 - 13.5V (xxxx =3370-4200) xxxx
RACD60-2400/OF*
RACD60-xxxx/IP67
17 - 24V 2150 - 2500mA 2.4A
17 - 24V (xxxx =2150-2500) xxxx
87% 30-60W
RACD60-2100/OF*
RACD60-1400/OF
RACD60-xxxx/IP67
21 - 28V 1400 - 2140mA 2.1A
21 - 28V 1400 - 2140mA 1.4A
21 - 28V (xxxx =1400-2140) xxxx
89% 30-60W
RACD60-1050/OF*
38 - 54V 700 - 1100mA 1.0A 89% 27-60W
RACD60-700/OF
38 - 54V 700 - 1100mA 0.7A
RACD60-xxxx/IP67
38 - 54V (xxxx =700 - 1100) xxxx
Standard is /OF open frame version (output current limit adjustable with on-board trimmer)
* use suffix /TOF for open frame version with thermal feedback (output current limit adjustable with ext. voltage)
Suffix /IP67 is for waterproof potted version (non-adjustable - preset output currents only)
Specifications (typical at 25°C and after warm up time unless otherwise specified )
E340696
RoHS
2002/95/EC
6/6
UL 8750 Certified
cUL 8750 Certified
EN 61347 Certified
Input Voltage Range
Rated Power
Input Frequency Range
Power Factor Correction
Input Current (full load)
Inrush Current (cold start)
Leakage Current
Input Fuse
Output Current Accuracy
Output Current Adjust
Line Voltage Regulation
Load Voltage Regulation
Minimum Load Current
Output Ripple and Noise
Operating Frequency
Efficiency at Full Load
Isolation Voltage (60Hz RMS)
Temperature Coefficient
Overload Protection
Short Circuit Protection
All Versions
90-264VAC
60 Watts max.
All Versions
50/60 Hz
Full Load, 115VAC/230VAC
> 0.9
115VAC/230VAC
0.8A / 0.4A max.
115VAC/230VAC
25A / 50A max.
230VAC/63Hz
<0.7mA max.
Built-in
3.15A Slow Blow
Full load
Preset Potentiometer (/OF)
External Voltage (/TOF)
±5%
75% to 100% approx.
LL to HL at Full Load
±4% typ.
60% to 100% Load
±5% typ.
see table
20MHz limited,with 0.1µF + 47µF
5Vp-p max.
All Versions
65kHz typ.
input to output (/OF, /TOF Version)
input to output (/IP67 Version)
input to filter ground
output to filter ground
see table
3.75kVAC / 1 minute
4kVAC / 1 minute
1880VAC / 1 minute
500VAC / 1 minute
All Versions
±0.02%/°C typ.
All Versions
105% typ.
Continuous, Hiccup, Automatic Restart
RACD60
Description
The RACD60 is a compact universal input voltage
60W constant voltage/constant current power
module suitable for driving high power LEDs.
The LED driver has a dual mode of operation:-
CV mode: at loads below the preset current limit,
the RACD60 behaves as a fixed voltage source.
CC mode: at loads above the preset current limit,
the RACD60 behaves as a fixed current source.
Thus the same power supply can be used with
both CV and CC LED modules.
The RACD60 series have a universal input voltage
range with active power factor correction and are
fully protected against output short circuit, over-
load and over-temperature.
Two versions are available: a low cost open frame
with user-adjustable current limit and a sealed
IP67 potted version with fixed output currents for
outdoor and high humidity applications.
Please Read Application Notes
26
REV: 3/2011
www.recom-electronic.com