RACD150-A Datasheet, PDF (1/2 Pages) Recom International Power – 150 Watt Single Output

Features
LED DRIVER
● High Output Voltage
● Universal AC Input
● Constant Current Operation
● Active Power Factor Correction
● IP67 Design for Indoor and Outdoor Use
● Compact Size
● Digital PWM and Analogue Voltage Dimming
Description
The new RACD150A LED drivers offer constant output currents of 1400mA, 1050mA or 700mA, with voltages
from 60V up to 210V. The series supports dimming via PWM or 1-10V signals and is fully IP67 sealed for
outdoor as well as indoor applications. With their wide input voltage range of 90 to 305VAC, the new drivers can
be used worldwide on 115Vac, 230Vac and 277Vac supplies. The converters operate with full load efficiencies
of more than 93%, feature low THD (15%) and active PFC with power factors exceeding 0.98, and are fully
protected against short circuit, overload and over-temperature conditions. Applications include high-power area
lighting as well as car parks, warehouse or security lighting. The LED drivers are UL8750 and EN61347 certified,
comply with FCC and European EMC standards and come with a full 5 year warranty.
Selection Guide
Part
Number
RACD150-700A
RACD150-1050A
RACD150-1400A
Input
Voltage Range
(VAC)
90-305
90-305
90-305
Rated
Power
(W)
147
150
150
Output
Voltage Range
(VDC)
60-210
60-143
60-107
Rated
Output Current Efficiency
(mA)
(%)
700
92
1050
92
1400
91
Specifications (measured at 230VAC and 25°C ambient temperature)
Input Voltage Range
90-305 VAC or 127-430VDC
Input Frequency Range
47-63Hz.
Power Factor
Full Load, 120VAC
>0.98
Full Load, 240VAC
>0.94
75% Load, 240VAC
>0.90
DC Dimming
Open = 100%
DC 1-10V
PWM Dimming
Open = 100%
Duty 10% - 100%
Freq.
500Hz - 3000Hz
Voltage
Hi=10V, Low=0V
THD (@ 230VAC/50Hz)
700A
±10%
1050A, 1400A
±11%
Input Current
115VAC
2A max.
240VAC
1A max.
Input/Output Isolation
3.75kVAC / 1min
Input/Case Isolation
1.8kVAC / 1min
Output/Case Isolation
0.5kVAC / 1min
Leakage Current
230VAC
<0.75mA
Inrush Current
240VAC
cold start 65A max.
Voltage Tolerance
±10%
Current Tolerance
±5%
Ripple & Noise (@20MHz bandwidth) ⁽¹⁾
2000mV max.
Over Voltage Protection
105 - 130% Rated Voltage
Shutdown Mode
Short Circuit Protection
Constant current limit and recovers after fault condition is removed
Over Temperature Protection
Shutdown Mode
Operating Temperature Range (Refer to Output Load Derating Curve) Ambient
-40°C to +55°C
(free air convection)
Case Temperature
100°C max.
Operation Humidity
20%-90% RH Non-Condensing
Storage Temperature
-40°C to +80°C
Storage Humidity
10%-95% RH
Vibration
2G 10min/1Cycle, Period for 60 min
10-500Hz
continued on next page
L-70
REV: 0/2015
LIGHTLINE
AC/DC-Converter
with 5 year Warranty
150 Watt
Single
Output
RoHS
2011/65/EU
6/6
UL 8750 Certified
EN 61347 Certified
RACD150-A
Derating-Graph
(Ambient Temperature)
Load
100%
80%
60%
40%
20%
-40 -10 10 30 55 70
Ambient Temperature (°C)
Refer to Application Notes
www.recom-power.com