RACD100-PSE Datasheet, PDF (1/2 Pages) Recom International Power – 100 Watt Single Output

Features
LED DRIVER
● Universal AC Input
● Constant Voltage / Constant Current Operation
● Active Power Factor Correction
● IP67 Design for Indoor and Outdoor Use
● Cooling by Free Air Convection
● PSE Certified for Japan market
LIGHTLINE
AC/DC-Converter
with 5 year Warranty
Description
The RACD100-PSE LED driver series offers 100W of power with a universal input voltage range of 90-130VAC and
constant current output up to 8.3A at a voltage of approximately 12V. The series features a unique dual mode
operation for either constant current or constant voltage making it suitable for driving LEDs directly or via local con-
stant-current DC/DC modules directly on the light engine board. The RACD100-PSE series are fully sealed IP67 LED
drivers and therefore ideally suited for indoor and outdoor applications including road, street and walkway lighting,
high-bay, LED signage, and outdoor area lighting for car parks, public buildings, and tunnels. The LED drivers are
PSE certified and come with a 5 year warranty.
Selection Guide
Part
Number
CV Mode
CC Mode
Efficiency
Constant Voltage Current Range DC Voltage Range Constant Current (115VAC)
(V)
(A)
(V)
(A)
(%)
RACD100-12-PSE
12
0-8.3
9-12
8.3
87
RACD100-24-PSE
24
0-4.2
14-24
4.2
87
RACD100-36-PSE
36
0-2.8
26-36
2.8
89
RACD100-48-PSE
48
0-2.1
34-48
2.1
88
Specifications
Input Voltage Range
Input Frequency Range
Power Factor
Full Load, 115VAC
THD
Full Load, 115VAC
AC Current
115VAC
Input/Output Isolation
Input/Case Isolation
Output/Case Isolation
Leakage Current
Voltage Tolerance
Start-up Time
Full Load, 115VAC
Ripple & Noise (at 20MHz bandwith)
Over Current Protection
95%-105% rated current
Short Circuit Protection
Over Voltage Protection
12V
Latch Mode
24V
(Power off to recover)
36V
48V
Over Temperature Protection
Operating Temperature Range
without derating
(free air convection, according to PSE) Case Temperature
Operation Humidity
Storage Temperature
Storage Humidity
Vibration
IP Rating
EMC Standards (designed to meet) EMC Compatibility
Harmonic Current
EMC Immunity
L-60
90-130 VAC or 127-184VDC
47-63Hz.
>0.98
8% max.
1.4A max.
3.75kVAC / 1minute
1.8kVAC / 1minute
0.5kVAC / 1minute
<0.75mA
-1% to 5%
1.5s
150mVp-p max.
Auto-Recovery
Hiccup Mode
15V typ.
31V typ.
45V typ.
58V typ.
Tcase 95°C ±10°C
-20°C to +50°C( see graph)
75°C max.
20%-90% RH Non-Condensing
-40°C to +80°C
10%-90% RH
10-500Hz, 2G, 60 Min. along X, Y and Z
IP67
EN55015
FCC, Part 15
EN61000-3-2 Class C (≥75% load)
EN61000-3-3
EN61000-4-2, 3, 4, 5, 6, 11
continued on next Page
REV: 0/2015
100 Watt
Single
Output
RoHS
2011/65/EU
6/6
RACD100-PSE
Note:
All LED Drivers may not be used without a load.
They must be switched on the primary side
only. Noncompliance may damage the LED or
reduce its lifetime.
Refer to Application Notes
www.recom-power.com