RACD06 Datasheet, PDF (1/2 Pages) Recom International Power – 6W AC-DC Class II LED Power Supply

Features
LED Driver
● 6W AC-DC Class II LED Power Supply
● 350mA to 700mA CC/CV Output
● ENEC, UL, RCM and CB Certified
● Universal Input Voltage Range
● Fused Input, Protected Output
● 3kVAC Isolation
● Low Cost
● 3 Year Warranty
LIGHTLINE
AC/DC-Converter
with 3 year Warranty
Description
A compact universal input 6W constant current switching power module suitable for driving up to 12 high power LEDs.
The output (dual constant voltage / constant current mode) current limit is fixed at 350mA, 500mA or 700mA. At lower
output currents, the output is constant voltage.
Selection Guide
Part
Number
Nominal
Input Voltage
(VAC)
RACD06-350
universal
Input Current
at full load
(mA)
120
Output
Voltage Range
(VDC)
2.5-24
Output
Current
(mA)
350
Max
#
LEDs
6 x 1W
Efficiency
typ.
(%)
79
RACD06-500
universal
120
2.5-14
500 12 x 0.5W 70
RACD06-700
universal
120
2.5-12
700 3 x 2W
72
Specifications (typical at 25°C and after warm up time unless otherwise specified )
Input Voltage Range
90-264VAC or 120-370VDC
Rated Power
6W nom. / 7.5W max.
Input Frequency Range
47-63 Hz
Power Factor
Full Load, 115VAC/230VAC
0.4
Output Voltage Range
350mA CC
2.5 - 22VDC
0-300mA CV
24V
500mA CC
2.5 - 12VDC
0-490mA CV
14V
700mA CC
2.5 - 8.4VDC
0-600mA CV
12V
Inrush Current (<2mS)
115VAC/230VAC
10A max.
Leakage Current
115VAC/240VAC - 60/50Hz
0.4mA typ.
Input Fuse (Built-in)
Standard
T2A
Input Current
Full Load, Nominal Vin
see table
Output Current Accuracy (combined Tolerance, Load Regulation and Line Regulation)
±10%
Minimum Load
Open Circuit Protected
1 LED
Output Ripple
0.2Ap-p max.
Hold Up Time
18ms min.
Operating Frequency
132kHz max.
AC RMS Isolation Voltage (input to output)
3.75kV / 1 minute typ., 3kV / 1 minute min.
Temperature Coefficient
±0.02%/°C typ.
Overload Protection
120% typ.
Short Circuit Protection
Continuous Current Limit
Output Overvoltage Protection
350mA Version
24V Zener Diode Clamp
500mA Version
14V Zener Diode Clamp
700mA Version
12V Zener Diode Clamp
Overtemperature Protection
Shutdown, Automatic restart after cooling down
Operating Temperature Range
Ambient Temperature
-20°C to +65°C
(free air convection)
Case Temperature
80°C max.
continued on next page
www.recom-international.com
REV: 1/2013
6 Watt
Single
Output
RoHS
2011/65/EU
6/6
E340696
UL-8750 Certified
EN 61347 Certified
ENEC Certified
RACD06
Please Read Application Notes
L-21