English
Language : 

RACD06-LP Datasheet, PDF (1/4 Pages) Recom International Power – Terminal Block Input/Output with Cable Clamps
Features
LED
Driver
• Low Profile Case (11mm height max.)
• 350mA to 700mA Constant Current Outputs
• Terminal Block Input/Output with Cable Clamps
• Fully Protected (OLP, SCP, OCP, OTP)
• low Standby Power, ErP conform
• low cost
AC/DC Converter
RACD06-LP
Description
These low profile constant current LED drivers have been designed for cost-sensitive applications.
The SELV outputs are suitable for both independently supplied or built-in power-supply LED luminaires.
Their low profile design allows them to be invisibly built into furniture, discreetly ounted under shelves
or integrated in space-restricted applications such as coving lighting, strip lighting or troffer lighting sys-
tems. The power supplies are short circuit and overload protected and come with a full 3-year warranty.
6 Watt
Constant
33 YEAR
warranty
Current Single
Output
Selection Guide
Part
Number
nom. Input
Voltage
[VAC]
Input
Current
[mA]
Output
Voltage Range
[VDC]
Output Efficiency Output
Current
typ. Power max.
[mA]
[%]
[W]
RACD06-350-LP
230
80
2-18
350
77
6
RACD06-500-LP
230
80
2-12
500
75
6
RACD06-700-LP
230
80
2-9
700
74
6
All LED Drivers may not be used without a load. They must be switched on the primary side only.
Noncompliance may damage the LED or reduce its lifetime.
Specifications (measured @ ta= 25°C, 240VAC and rated load)
BASIC CHARACTERISTICS
Parameter
Condition
Min.
Typ.
Input Voltage Range
198VAC
230VAC
Inrush Current
Start-up Time
Input Frequency Range
47Hz
No Load Power Consumption
Power Factor
full load, 230VAC
Internal Operating Frequency
full load
60kHz
Output Ripple Current (1)
Notes:
Note1: Measured at 20MHz Bandwidth using 0.1µF & 47µF parallel capacitor.
Max.
264VAC
11.0A
100ms
63Hz
0.4W
0.55
140kHz
50mAp-p
ERP
compliant
IEC/EN61347-1 Certified
IEC/EN61347-2-13 Certified
ENEC Certified
CB Report
EN55015 Compliant
REGULATIONS
Parameter
Output Current Accuracy
Line Regulation
Load Regulation
Condition
Value
±5% max.
5% max.
5% max.
www.recom-power.com
REV.: 0/2016
L-1