RACD03-PSE Datasheet, PDF (1/4 Pages) Recom International Power – 3 Watt CC/CV Single Output

Features
LED
Driver
• 3W Class II AC-DC LED Power Supply
• 350mA, 500mA and 700mA CC/CV Output
• Fused Input and SCP, OVP, OLP, OTP
• 3.75kVAC Isolation
• IP66 Rated
• Low Cost
AC/DC Converter
RACD03-PSE
Description
A compact universal AC input 3W constant current switching power module suitable for driving 1 - 6
high power LEDs. The output (dual constant voltage / constant current mode) current limit is fixed at
350mA, 500mA or 700mA. At lower output currents, the output is constant voltage. Connections are
via 118mm long flying leads.
3 Watt
CC/CV
3^{3 YEAR}
w_arranty
Single Output
Selection Guide
Part
Number
nom. Input CC CV ⁽¹⁾ Efficiency
Rated
Voltage Range Mode Mode
typ. Power nom./max.
(VAC)
(VDC) (mA) (VDC) (mA)
(%)
(W)
RACD03-350-PSE 100-120
3-12 350
15 0-300
72
3 / 4.2
RACD03-500-PSE 100-120
3-9.5 500
none
71
3 / 4.6
RACD03-700-PSE 100-120
3-4.5 700
6 0-600
62
3 / 3.15
All LED Drivers may not be used without a load. They must be switched on the primary side only.
Noncompliance may damage the LED or reduce its lifetime.
Specifications (measured at Ta= 25°C, nominal input voltage, rated load after warm up)
BASIC CHARACTERISTICS
Parameter
Input Voltage Range
Output Voltage Range
Input Current
Input Frequency Range
Hold-up Time
Output Ripple Current
Condition
full load, 100VAC
Min.
-10%
3VDC
47Hz
18ms
Typ.
Max.
+10%
15VDC
110mA
63Hz
0.1Ap-p
Constant Current (CC) and Constant Voltage (CV) ⁽¹⁾
CV
15V
12V
11V
9.5V
6V
4.5V
3V
Output Current
CV
CC
CC
RACD03-350-PSE
RACD03-500-PSE
RACD03-700-PSE
CC
Nominal Current Limits
Notes:
Note1: CV Mode is approved by Recom internal quality standard, but not certified according UL.
J61347-1(H20) Certified
J61347-2-13(H21) Certified
J55015(H20) Certified
www.recom-power.com
REV.: 0/2016
L-1