RAC02-SE-277 Datasheet, PDF (1/4 Pages) Recom International Power – 2 Watt Single Output

Features
Regulated
Converters
• 35mW max. No Load Power Consumption
• Efficiency up to 76%
• Isolated Output 3kVAC / 1 min
• SCP, OVP Protection
• Wide Operating Temperature Range:
-40°C to +85°C
• Universal Input 85-305VAC
AC/DC Converter
RAC02-SE/277
Description
The ultra-compact RAC02-SE/277 modules are available with output voltages of 3.3, 5, 12 and
24V, and the input-to-output isolation is 3kVAC/1min. With a standby consumption of 35mW
maximum, the mini power supplies are particularly suitable for energy-saving sleep mode and
standby applications. Because of its compact design (height <18mm), it is a versatile solution for home
automation and other similar applications. Complete with an integrated input filter, the series has
enhanced EMI performance and complies with EN55022, class B. The mini power supplies are
also protected against short circuit with fully automatic restart after the error has been solved. The
converters are EN/UL60950-1 certified and come complete with a 3 year warranty.
2 Watt
Single
Output
3^{3 YEAR}
warranty
Selection Guide
Part
Number
RAC02-3.3SE/277
RAC02-05SE/277
RAC02-12SE/277
RAC02-24SE/277
Input
Voltage Range
(VAC)
85-305
85-305
85-305
85-305
Output
Voltage
(VDC)
3.3
5.0
12
24
Output
Current
(mA)
600
400
167
83
Efficiency
typ.
(%)
67
70
73
76
Notes:
Note1: Test by minimum input and constant resistor load.
Max. Capacitive
Load ⁽¹⁾
(µF)
12000
5500
500
160
Specifications (measured at TA= 25°C, nominal input voltage (115/230VAC), full load and after warm-up)
BASIC CHARACTERISTICS
Parameter
Condition
Input Voltage Range
Input Current
Inrush Current
No load Power Consumption
Input Frequency Range
Hold-up time
Operating Frequency Range
Efficiency
Minimum Load
Output Ripple and Noise ⁽²⁾
full load, 115VAC
full load, 230VAC
cold start at 25°C, 115VAC
cold start at 25°C, 230VAC
85-305VAC, 47-440Hz
AC Input
115VAC
100% load at nominal Vin
3.3V
5V, 12V, 24V
Min.
85VAC
120VDC
47Hz
18ms
Typ.
47mA
30mA
Max.
305VAC
430VDC
15A
30A
35mW
440Hz
55kHz
see Selection Guide
2%
300mVp-p
250mVp-p
E224736
EN55024 Certified
EN60950-1 Certified
UL60950-1 Certified
Notes:
Note2:
Ripple and Noise is the maximum peak-to-peak voltage value measured at the output with a
20MHz bandwidth, at rated line voltage at full load. And with a 47µF low-ESR electrolytic
capacitor i n parallel with a 0.1µF ceramic capacitor across output.
www.recom-power.com
continued on next page
REV.: 4/2016
PA-1