R05P22005D Datasheet, PDF (1/5 Pages) Recom International Power – DC/DC Converter

Features
Unregulated
Converters
• Power Sharing
• high 5.2kVDC/1minute Isolation
• Efficiency up to 85%
• Wide Operating Temperature Range from -40°C to +90°C
• UL60950 Certified
• IEC/EN60950 Certified
DC/DC Converter
RxxP22005D
Description
The RxxP22005D series features DC/DC converters which are especially designed for SiC mosfet
drivers. The modules are available with input voltages of 5, 12, 15, or 24VDC with two
asymmetric outputs of +20VDC and -5VDC. A special feature of this converter is output
power sharing: the RxxP22005D can be used with equal power (asymmetrical current) or equal current
(asymmetrical power) loads. The modules offer 5.2kVDC isolation. The operating temperature range of
-40C to +100°C (with derating) meets harsh environmental requirements.
2 Watt
SIP7 for
3^{3 YEAR}
warranty
SIC Application
Selection Guide
Part
Number
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(mA)
50/-200
R 05P22005D 5 20/-5 _+/-80
50/-200
R 12P22005D 12 20/-5 _+/-80
50/-200
R 15P22005D 15 20/-5 _+/-80
50/-200
R 24P22005D 24 20/-5 _+/-80
Efficiency typ.
typ.
(%)
82
83
82
max. Capacitive
Load ⁽¹⁾
(µF)

47/680

47/680
83

84
47/680
84

85
47/680
Notes:
Note1: Max. capacitive load is tested at nominal input voltage and full load.
Model Numbering
R__P22005D/_
Input Voltage
Protection ⁽²⁾
Output Power
Dual Output
Output Voltage
Notes:
Note2: without suffix, without Short Circuit Proetction

add suffix “/P” for continuous short circuit protection
Examples:
R05P22005D
R12P22005D/P
= 5Vin, 20/-5Vout, without SCP function
= 12Vin, 20/-5Vout, with continuous SCP function
E358085
UL60950-1 Certified
CSA C22.2 No. 60950-1-03
IEC/EN60950-1 Certified
EN55022
Specifications (measured at TA= 25°C, nominal Input and full load after warm-up time unless otherwise noted)
BASIC CHARACTERISTICS
Parameter
Input Voltage Range
Operating Frequency
Minimum Load
Output Ripple and Noise ⁽³⁾
Condition
Min.
-10%
20kHz
Typ.
55kHz
0%
100mVp-p
Max.
+10%
200mVp-p
Notes:
Note3: Ripple and Noise is measured with a 20MHz badnwidth and a 0.1µF ceramic capacitor.
www.recom-power.com
continued on next page
REV.: 1/2016
Refer to Applications Notes
ECO-1