ZJ2-BC2W Datasheet, PDF (1/1 Pages) RCD COMPONENTS INC. – ZERO-OHM JUMPERS, 2A to 25A

ZERO-OHM JUMPERS, 2A to 25A
ZJ SERIES - INSULATED
Z SERIES - UNINSULATED
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
RESISTORS CAPACITORS COILS DELAY LINES
Industry’s widest range of zero-ohm jumpers
Low cost, delivery from stock
Commercial & military applications
3 standard styles- insulated, uninsulated, &
surface mount (also refer to ZC Series for thick-
film chip jumpers and ZCF for cylindrical MELF)
Horizontal and vertical tape & reel available
Custom models to 50A available
.95 [24] Min.
L
d
D
Inch [mm]
RCD “zero-ohm” jumpers were developed for use as interconnection devices
between points on a PCB when separated by circuit paths, or when the pcb
layout has been changed requiring new point connections. Specify ZJ Series
(insulated bodies) when jumpers are in close proximity with conductor paths.
Specify Z Series (uninsulated tin plated copper) for circuits involving higher
current levels. In addition to the 4 standard wire sizes listed (18-22 awg),
Series Z is available in a wide range of custom sizes (12-26awg). RCD’s
Z1206 SM jumper achieves the industry’s highest current rating in a 1206-
size due to the heavy duty tin plated copper element. The ultra low resistance
of type Z1206 (.00012Ω) is 25-400 times better than conventional models!
Z1206 is formed into a U-shape to provide 500V isolation clearance.
SERIES ZJ INSULATED JUMPER SPECIFICATIONS
RCD Military
L
D
d
Maximum Amp. Rating
Type Type ±.015 [.4] ±.012 [.3] ±.003 [.08] Resistance @70°C*
ZJ1
.145 [3.4] .061 [1.55] .020 [.5]
.02Ω
2A
ZJ1B AA55502 .145 [3.4] .061 [1.55] .020 [.5]
.01Ω
5A
ZJ2
.250 [6.4] .090 [2.3] .024 [.6]
.02Ω
3A
ZJ2B AA55501 .250 [6.4] .090 [2.3] .024 [.6]
.01Ω
10A
ZJ3
.335 [8.5] .110 [2.8] .025 [.63]
.02Ω
5A
* Increased current ratings available
2.36 ±.12 [60 ±3]*
.200
[5]
d
Dielectric
Strength
300V
300V
500V
500V
500V
Operating Temp.
Range
-55 to +155°C
-55 to +155°C
-55 to +155°C
-55 to +155°C
-55 to +155°C
.126±.008
[3.2±0.20]
.016±.002
[.40±0.05]
.050±.008
[1.27±0.20]
Qty per
Reel, Typ.
5000
5000
5000
5000
4000
2.06 [52.4] std, 26-100mm avail.
* Lengths from 0.2” to 6” [5 to 152mm] are avail.
.062±.004
[1.57±0.10]
SERIES Z UNINSULATED JUMPER SPECIFICATIONS
RCD d ±.003 ≈Wire Resistance Max. Amp Qty per
Type [.08] Gauge (Ω / inch) Rating 25°C Reel, Typ.
Z22 .024 [.6] 22 AWG ≈.0015Ω
10A
10,000
Z21 .028 [.7] 21 AWG ≈.0011Ω
15A
8,000
Z20 .031 [.8] 20 AWG ≈.0009Ω
20A
8,000
Z18 .040 [1] 18 AWG ≈.0006Ω
25A
5,000
SERIES Z and ZJ Cut & Form Options
Most popular sizes are listed below but any W & H dimension from 0.2 to 1”
[5 to 25mm] is available. Custom forming with standoffs also available.
C&F Code W
H
C2
.200 [5] .250 [6.3]
C12 .25 [6.3] .250 [6.3]
C25 .30 [7.6] .250 [6.3]
C4
.40 [10] .250 [6.3]
C5 .50 [12.7] .250 [6.3]
W ± .02 [.5]
H
±.04 [1]
SERIES Z1206 SM JUMPER SPECIFICATIONS
Resistance (25°C, no load) 120uS (0.00012S)
Current Rating ^†
25A at 25°C
Inductance
5nH
Isolation Voltage
500V
Soldering Temp.
260°C 10 Sec
Operating Temp. Range
-55°C to +175°C
Amperage Derating
Derate .667%/deg>25°C
† _{Requires suitably heavy-duty conductor paths to carry high currents}
P/N DESIGNATION:
ZJ2 - T
W
RCD Type
Packaging: B = Bulk, T = Tape & Reel
Optional Cut & Form Codes: C2 - C25, per
table. Leave blank if no forming (not applicable to
Z1206 which are formed as standard)
Termination: W= Lead-free, Q= Tin/Lead (leave
blank if either is acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: [phone] Fax: [phone] Email:[e-mail]
FA066B Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
57