ULV5X-R010-KB Datasheet, PDF (1/1 Pages) RCD COMPONENTS INC. – ULTRA-LOW OHM, 2 WATT to 20 WATT

ULTRA-LOW OHM, 2 WATT to 20 WATT
ULV SERIES
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
RCD ULV5A
.005Ω 5%
RESISTORS CAPACITORS COILS DELAY LINES
RCD ULV10
.02Ω 5%
FEATURES
Values from 0.002Ω to 0.05Ω, tolerances to ±0.5%
Ceramic body results in a fireproof construction
Welded construction, low-inductance
Excellent overload capability
Available on RCD’s exclusive SWIFT^TM delivery program!
Ultra Low Value, 2-Terminal
When ordering low value resistors please note that the lead
resistance can be a contributing factor. RCD measures the
resistance value at 3/8 ±1/32” from each end of the body (per MIL-R-
49465). If in actual use, a different span from the resistor body to
the PCB will be required, please advise at the time of ordering.
OPTIONS
Option X: Non-inductive design (<0.1uH)
Option A: Built-in standoffs available
Option E: Low thermal EMF design
1.00” Min ULV2
1.12” Min ULV3,5
A
1.25” Min ULV7-20
.041 [1.0]
max.
↓
↑
← B→
↑
C
↓
↓_D
Opt. A Stand-offs ^↑
TYPICAL PERFORMANCE
TC_{T25 toT100} .025Ω to 0.05Ω 200ppm/°C typ., 50 & 100ppm avail.
.01Ω to 0.0249Ω 400ppm/°C typ., 200 & 100ppm avail.
.005Ω to 0.0099Ω 800ppm/°C typ., 400 & 200ppm avail.
.002Ω to 0.0049Ω 1600ppm/°C typ., 800 & 400ppm avail.
Operating Temp.
-55° to +275° C
Terminal Strength
5 lbs. minimum
Dielectric Strength
1000V
Short Time Overload
5x rated W, 5 Sec., nte 1.5x max A
Moisture Resistance
1.0%
Temp. Cycle (-40/+125°C)
1.0%
Load Life (1000 hours)
1.0%
Shock and Vibration
0.2%
RCD
Type
Wattage Current
Rating¹ Rating¹
@ 25°C @ 25°C
MIL
Type²
Resis.
Range¹
(Ω)
ULV2
2W
20A
-
.002 - .05
ULV3
3W
25A
-
.002 - .05
ULV5
5W
30A
RLV41 .002 - .05
ULV7
ULV10
7W
10W
35A
RLV42 .0025 - .05
40A
RLV43 .003 - .05
ULV15
15W
40A
-
.003 - .05
ULV20
20W
40A
-
.005 - .05
1 _{Increased rating available, consult factory}
2 _{Military part numbers are for references only and do not imply qualification.}
DIMENSIONS [Numbers in brackets are mm.]
A
±.04 [1.0]
B
±.032 [.81]
C
±.05 [1.3]
D Typ.
(Opt. A only)
.70 [17.8]
.27 [6.8]
.27 [6.8]
.06 [1.5]
.88 [22.4]
.31 [7.9]
.31 [7.9]
.06 [1.5]
.88 [22.4]
.38 [9.7]
.35 [8.9]
.06 [1.5]
1.42 [36] max.
.38 [9.7]
.35 [8.9]
.10 [2.5]
1.96 [50] max.
.38 [9.7]
.38 [9.7]
.10 [2.5]
1.96 [50] max.
.50 [12.7]
.50 [12.7]
.10 [2.5]
2.55 [65] max.
.56 [14.2] max.
.50 [12.7]
.10 [2.5]
P/N DESIGNATION:
ULV5 - R005 - J B W
RCD Type
Option(s): X, E, A (leave blank if standard)
Resis. Code 0.5%-1%: use 3 signif. digits & multiplier,
e.g. R010=.01Ω, R050=.05Ω, etc.
2%-10%: 2 digits &multiplier, R01=0.01Ω, R05= 0.05Ω, etc.
Use extra digits as necess: R0025, R005, R0075, R012
Tolerance: K=10%, J=5%, H=3%, G=2%, F=1%, D=0.5%
Packaging: B= Bulk (standard)
Optional TC: 50=50ppm, 101=100ppm, 201=200ppm,
401=400ppm, 801=800ppm (leave blank if standard)
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is
acceptable, in which case RCD will select based on lowest price
and quickest delivery)
DERATING:
120
100
80
60
40
20
0 _{-55 25 50}
100
150
200
AMBIENT TEMPERATURE °C
250 275 300
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: [phone] Fax: [phone] Email:[e-mail]
FA067B Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
53