TP05-1R00-DBW Datasheet, PDF (1/1 Pages) RCD COMPONENTS INC. – HIGH POWER PLANAR RESISTORS, 5W to 100W

HIGH POWER PLANAR RESISTORS, 5W to 100W
TP SERIES CERAMIC SUBSTRATE
Term.W is
RoHS
TPS SERIES ^compliant
STEEL SUBSTRATE ^RoHS
& 260°C
compatible
RESISTORS CAPACITORS COILS DELAY LINES
Space saving flame retardant design
High power density
Thin profile, and lightweight
Low Inductance: 50nh typ at 1MHz
Wide resistance range: 0.5Ω to 1MΩ
Excellent transient withstanding capabilities
Standard tolerances: as tight as ±0.5%
OPTIONS
Special marking, extended value range, custom
sizes and shapes, burn-in and military screening,
insulated leads, quick-disconnect terminals, multiple
resistor circuits, etc. Consult factory for assistance.
SPACE SAVING THICK FILM PLANAR RESISTORS!
Series TP/TPS offer high power density in a lightweight design. Designed for
switch mode power supplies, snubber circuits, heaters, in-rush limiters,
dynamic braking, and other power applications, the planar construction offers
significant PCB real estate savings over conventional resistors, especially in
forced air applications. The unique design enables very low inductance and
excellent surge capabilities. Series TP utilize alumina substrates for excellent
heat dissipation. Series TPS utilize stainless steel substrates for even greater
dissipation and durability. A special hi-temp/hi-voltage dielectric insulates the
resistor and terminals from the metal substrate, enabling greater voltage and
insulation compared to porcelain enameled models.
|
B
|
|
B
|
|
B
|
Series TP 5W - 10W
A ^{2 Pins, Ceramic}
→
← 0.1
[2.54]
0.120 [3]
min
.028”
Dia.
↓
↑
.07[1.8]
→ ← .02[.51]
C
→←
.012 [.3]
Series TP 15W-100W
A ^{4 Pins, Ceramic}
→ ← 0.24±.01
[.61±.25]
0.120 [3]
min
.050”
Dia.
↓
→ ← .024 [.6]
.150 min
[3.8]
0.30 typ.
[7.6]
→ ←.04
[1.02]
C
↑→ ←
.20 ±.01
.20”
[5.08 ±.25]
Series TPS
A Steel Substrate
50W - 100W 6 Pins
.20”
C
.20”
.04” Dia.
D
.20”
.37[9.4]
.20”
.20”
RCD
Type
Wattage Max. Voltage
@ 25°C
Rating¹
Standard
Resistance
Range²
A Max
DIMENSIONS Inch [mm]
B Max
C
D
TP05
5W
500V
1Ω to 200K
1.015 [25.8]
.512 [13]
.200±.01³ [5.08±.25]³
-
TP07⁵
7.5W
500V
1Ω to 200K
1.015 [25.8]
.765 [19.4]
.500±.01^3,4 [12.7±.25]
-
TP10
10W
500V
1Ω to 300K
1.015 [25.8]
1.015 [25.8]
.800±.01³ [20.3±.25]
-
TP15⁵
15W
500V
1Ω to 1MΩ
1.22 [31]
1.27 [32.26]
1.00±.02 [25.4±.5]
-
TP25⁵
25W
500V
1Ω to 1MΩ
1.18 [30]
2.22 [56.39]
1.90±.02 [48.26±.5]
-
TP50⁵
50W
500V
1Ω to 1MΩ
2.27 [57.66]
2.22 [56.39]
1.90±.02 [48.26±.5]
-
TPS50
50W
250V
0.5Ω to 10KΩ
2.80 [71.1]
1.77 [44.96]
1.00±.02 [25.4±.5] 1.40±.02 [35.56±.5]
TPS100
100W
300V
0.5Ω to 20KΩ
3.65 [92.7]
2.59 [65.8]
1.30±.02 [33.02±.5] 1.70±.02 [43.18±.5]
1 _{Maximum Operating Voltage is DC or AC peak} 2 _{Expanded range available} 3 _{Available with 0.300” [7.62mm] pin spacing, specify opt.78} 4 _{Available with 0.200” [5.08mm] pin spacing, specify opt.80}
5 _{Preliminary information}
TYPICAL PERFORMANCE CHARACTERISTICS
Load Life (1000 hours)
±2%
Moisture Resistance
±1%
Temperature Cycling
±1%
Overload (not to exceed max voltage)
5x rated W, 200mS
Dielectric Strength
500VDC (750V avail)
Resistance to Solder Heat (260°C, 5 sec) ±0.5%
Temperature Coefficient (ppm/°C)
Operating Temperature
Power Derating
100ppm°C (≥2%=200ppm)
TP = -55°C to 170°C
TPS = -55°C to 275°C
TP = 1%/°C > 70°C
TPS = 0.4%/°C > 25°C
P/N DESIGNATION: TP05
- 102 - J B W
RCD Type
Options: assigned by RCD
(leave blank for standard)
Resis.Code 0.5%, 1%: 3 signif. figures & multiplier,
e.g. 1R00=1Ω,10R0=10Ω,1000=100Ω,1001=1K, etc.
Resis.Code 2%-10%: 2 signif. figures & multiplier,
e.g. R50=.5Ω, 1R0=1Ω, 100=10Ω,101=100Ω,102=1K, etc.
Tol. Code: D=0.5%, F=1%, G=2%, J=5%, K=10%, M=20%
Packaging: B = Bulk
Termination: W= Lead-free, Q= Tin/Lead
(leave blank if either is acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: [phone] Fax: [phone] Email:[e-mail]
FA048E Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
68