SMN16AS-10R0-J Datasheet, PDF (1/1 Pages) RCD COMPONENTS INC. – THICK FILM SURFACE MOUNT NETWORKS SMALL OUTLINE MOLDED DIP

THICK FILM SURFACE MOUNT NETWORKS
SMALL OUTLINE MOLDED DIP
SMN16 SERIES
Choice of gull-wing or J-lead styles!
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
RCD’s SMN series feature SOIC-type packaging with gull-wing
leads, or SOJ type with leads formed under the body for even
greater space savings. The molded construction results in
excellent moisture resistance, and compliant leads prevent
solder joint fatigue under vibration and thermal shock conditions.
Epoxy-molded for excellent environmental performance
Standard tolerance: ±5% (1%, 2% available)
Temperature coefficient: ±100ppm/°C typical
Available on 24mm embossed plastic tape or magazine tube
RESISTORS CAPACITORS COILS DELAY LINES
POWER RATING
Config. ^{Single Resistor}
Package
Type _{@ 25°C @ 70°C @ 25°C @ 70°C}
A
.25W
.16W
.75W
.5W
B
.125W .08W
.75W
.5W
STANDARD CONFIGURATIONS
(Custom circuits available.)
Config. A
(Isolated resistors)
16 PIN/8RES
Pin #1
DERATING
.75 ^16-Pin
.65
Config. A
.250
Config. B
.125
0
25
50
75
AMBIENT TEMP. (°C)
S Type (SOIC)
100
125
150
J Type (SOJ)
Config. B
(bussed resistors)
16 PIN/15RES
Pin #1
SPECIFICATIONS, TYPICAL
Resistance Range
Resistance Tolerance
Voltage Rating
Temperature Range
Temperature Coefficient
T.C. Tracking
Voltage Coefficient
Thermal Shock
Short-Time Overload
Resistance to Solder Heat
Moisture Resistance
Load Life (1000 hours)
Dielectric Strength
33Ω to 3.3 Meg
±1, 2, 5, 10%
25VDC or √PR
(whichever is less)
-55 to +150°C
±200ppm/°C
50ppm/°C
<50 ppm/ V Typ.
±0.5% + .05Ω
±.25% + .05Ω
±.25% + .05Ω
±0.5% + .05Ω
±1.0% + .05Ω
200V Min.
.016[.4] → ←
← .43±.02 [11±0.5] →
.[0.416] _{→ ←}
← .43±.02 [11±0.5] →
.079 [2]
↓ max
→ ← .012 [.3]
↑_.004
← → [0.1]
.30± .02 [7.7± 0.3]
.085
[2.2] max.
← .040 [1] typ.
← → .240 ± .012
[6.1 ± .3]
P/N DESIGNATION:
SMN 16 A S - 102 - J B W
RCD Type
Number of Pins (16 is standard)
Configuration: A=Isolated, B=Bussed
Package Style: S= SOIC, J = SOJ
Resis.Code 1%: 3 signif. figures & multiplier (10R0=10Ω,
1000=100Ω, 1001=1K, 1002=10K, 1003=100K, 1004=1M)
Resis.Code 2%-5%: 2 signif. figures & multiplier (100=10Ω,
101=100Ω, 102=1KΩ, 103=10K, 104=100K, 105=1M, etc.)
Tolerance: J=5% (standard), G=2%, F=1%
Packaging: B = Bulk, M = Magazine, T = Plastic Tape
Termination: W= Lead-free, Q= Tin/Lead
(leave blank if either is acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: [phone] Fax: [phone] Email:[e-mail]
FA072A Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
33