RH2P-1001 Datasheet, PDF (1/1 Pages) RCD COMPONENTS INC. – HIGH VALUE & HIGH VOLTAGE CYLINDRICAL RESISTORS

HIGH VALUE & HIGH VOLTAGE CYLINDRICAL RESISTORS
RG SERIES - General Purpose
Term.W is
RoHS
compliant
RH SERIES - High Precision
RoHS
& 260°C
compatible
RP SERIES - Professional Grade
RESISTORS CAPACITORS COILS DELAY LINES
UUUUU
Internal construction of RP Series
(non-inductive serpentine film)
Industry’s widest range of high value/ high voltage resistors-
1/8 ~ 20W, 1KΩ~ 10¹³â„¦, 300V~ 90KV, TC’s to ±15ppm, ±0.05%~ 10%
Available on Tape & Reel (sizes <2.5” long)
OPTIONS
Options include formed leads, matched sets, custom marking, burn-in,
vacuum/space operation, custom sizes, etc. Opt. P = high pulse design,
Opt.H= increased voltage, Opt.B=increased power, Opt.58=hermetic
seal.
← → ^{1.35” min (1.06” on}
1/2W and smaller)
L
d ±.004
↓
→ D←
↑
RCD’s high voltage thick-film resistors represent the most advanced technology in the
industry. Series RG is designed for semi-precision applications, offering a low cost
solution up to 15KV. Series RH features a special composition and processing to
achieve improved tolerance, TC, & voltage (60KV). Series RP utilize highest grade
materials enabling tightest tolerances, lowest VC’s, TC’s to 15ppm, and superior
power/temp/voltage levels (90KV). RP utilize serpentine film pattern for lowest
inductance. Units are printed or banded with resistance value and tolerance as
minimum.
The ruggedness of these models enables superior long term reliability, especially in
demanding applications such as military, space, and medical equipment, as well as
electron microscopes, high impedance amplifiers, electrometer, radiation testers, etc.
RG
Series
RG1/8
RG1/4
RG1/2
RG1S
RG1
RG2
RG3
RG4
Wattage
@ 25°C
1/8W
1/4W
1/2W
1W
1W
2W
3W
4W
Voltage
Rating*
300V
500V
1KV
1.5KV
2KV
5KV
10KV
15KV
Dielectric
Strength
500V
500V
500V
500V
1KV
1KV
1KV
1KV
Dimensions Inch [mm]
L
D
.134 ±.04 [3.4±1.0]
.067 ±.025 [1.7 ± 0.64]
.256 ±.04 [6.5±1.0]
.098 ±.025 [2.5 ± 0.64]
.368 ±.04 [9.4±1.0]
.134 ±.032 [3.4 ± 0.81]
.472 ±.05 [12.0±1.3]
.158 ±.032 [4.0 ± 0.81]
.581 ±.05 [14.8±1.3]
.216 ±.032 [5.5 ± 0.81]
1.06 ±.062 [26.9±1.6]
.275 ±.032 [7.0 ± 0.81]
1.67 ±.062 [42.4±1.6]
.275 ±.032 [7.0 ± 0.81]
2.05 ±.062 [52.1±1.6]
.335 ±.032 [8.5 ± 1.02]
d
.020 [.5]
.024 [.6]
.025 [.64]
.028 [.7]
.031 [.8}
.031 [.8}
.031 [.8}
.040 [1]
Standard Resistance Range**(K=10³, M=10⁶, G=10⁹)
25ppm
50ppm
100ppm
200ppm
350ppm
N/A
1M-10M
1M-300M
1M-300M
1M-300M
N/A
100K-50M
100K-3G
100K-3G
100K-3G
N/A
100K-50M
100K-3G
100K-3G
100K-3G
N/A
200k-50M 200K-100M 200K-300M 200K-300M
N/A
200k-50M 200K-100M 200K-500M 200K-500M
N/A
N/A
**
**
1M-1.5G
N/A
N/A
**
**
1M-1.5G
N/A
N/A
**
**
1M-1.5G
RH Wattage Voltage Dielectric
Dimensions Inch [mm]
Standard Resistance Range** (K=10³,M=10⁶,G=10⁹,T=10¹²)
Series
RH1/8
RH1/4
@ 25°C
1/8W
1/4W
Rating*
500V
750V
Strength
500V
500V
L
.240±.04 [6.1±1.0]
.354±.04 [9.0±1.0]
D
.085±.025 [2.16±0.6]
.118±.04 [3.00±1.0]
d
0.024 [.6]
0.024 [.6]
25ppm
100K-50M
100K-100M
50ppm
50K-100M
100K-100M
100ppm
10K-100M
10K-300M
200ppm
10K-500M
10K-1G
≥400ppm
500M-4G
1G-5G
RH1/2 1/2W
1500V
500V
.500±.04 [12.7±1.0]
.180±.04 [4.57±1.0]
0.031 [.8] 100K-100M 100K-100M 100K-1G
100K-5G
1G-5G
RH1
1W
2000V
1KV
RH2
2W
5000V
1KV
RH3
3W
10KV
1KV
.571±.04 [14.5±1.0]
1.00±.08 [25.4±2.0]
1.65±.08 [41.9±2.0]
.180±.04 [4.57±1.0]
.265±.05 [6.73±1.3]
.265±.05 [6.73±1.3]
0.031 [.8] 100K-100M
.031/.04 [.8/1] 100K-100M
.031/.04 [.8/1] 100K-100M
100K-500M
100K-500M
100K-500M
100K-2G
100K-2G
100K-2G
100K-15G
100K-100G
100K-100G
15G-50G
100G-3T ¹
100G-10T ²
RH4
4W
15KV
1KV
2.05±.08 [52.1±2.0]
.320±.05 [8.13±1.3]
.031/.04 [.8/1]
-
100K-500M 100K-2G 100K-10G
-
RH6
6W
20KV
1KV
3.03±.08 [77±2.0]
.320±.05 [8.13±1.3]
.031/.04 [.8/1]
-
500K-500M 500K-2G 100K-10G
-
RH10
10W
35KV
1KV
4.70±.12 [119.4±3.1]
.320±.05 [8.13±1.3]
.031/.04 [.8/1]
-
1M-500M
1M-2G
100K-10G
-
RH16
16W
60KV
1KV
7.48±.12 [190±3.1]
.320±.05 [8.13±1.3]
0.04 [1.0]
-
1M-500M
1M-2G
100K-10G
-
1 _{RH2 is available in 400ppm TCR from 100G to 300G, 300G-600G is 1000ppm, 600G-3T is 1500ppm} 2 _{RH3 is available in 400ppm TCR from 100G-600g, 600G-1T is 1000ppm, 1T-10T is 1500ppm}
RP
Wattage Voltage Dielectric
Dimensions Inch [mm]
Standard Resistance Range**(K=10³, M=10⁶, G=10⁹)
Series @ 40°C Rating* Strength
L
D
d
15ppm
25ppm
50ppm
100ppm 200ppm
RP4
3.8W
15KV
1KV
1.063±.04 [27.0±1.0]
.315 ±.025 [8.0±.64]
.031 [.79]
1K - 1G
1K - 10G 1K - 10G 1K - 10G 1K - 10G
RP5
5W
21KV
1KV
1.457±.04 [37.0±1.0]
.315 ±.025 [8.0±.64]
.031 [.79]
1K - 1G
1K - 15G 1K - 15G 1K - 15G 1K - 15G
RP8
7.5W
30KV
1KV
2.047±.05 [52.0±1.3]
.315 ±.025 [8.0±.64]
.031 [.79]
1K - 1G
1K - 20G 1K - 20G 1K - 20G 1K - 20G
RP10
10W
45KV
1KV
3.071±.06 [78.0±1.5]
.315 ±.025 [8.0±.64]
.031 [.79]
1K - 1G
1K - 30G 1K - 30G 1K - 30G 1K - 30G
RP14
13.5W
60KV
1KV
4.000±.06 [101.6±1.5]
.315 ±.025 [8.0±.64]
.031 [.79]
1K - 1G
1K - 40G 1K - 40G 1K - 40G 1K - 40G
RP16
16W
72KV
1KV
4.800±.06 [121.9±1.5]
.315 ±.025 [8.0±.64]
.031 [.79]
1K - 1G
1K - 50G 1K - 50G 1K - 50G 1K - 50G
RP20
20W
90KV
1KV
5.984±.06 [152.0±1.5]
.315 ±.025 [8.0±.64]
.031 [.79]
1K - 1G
1K - 60G 1K - 60G 1K - 60G 1K - 60G
* Maximum working voltage is DC or AC RMS (50-60Hz sinusoidal) and is determined by E= (PR)^1/2, E not to exceed value listed in column above. **Consult factory for res. values outside the standard range
CUSTOM DESIGNS
Increased Ratings - increased power and voltage ratings are available with
special processing. By specifying Opt.H on RG series, voltage ratings are
increased by 100% (by 50% on sizes 2W-4W).
Matched Sets and Networks - cost savings up to 50% can often be achieved
by specifying tight matching requirements instead of tight tol. and TC reqts.
Resistance matching to 0.02% and TC tracking to 5ppm is available.
Threaded Terminations - resistors are available with tapped end caps for
series combination into virtually any voltage or resis. value.
Hermetic-Sealed Construction (Opt. 58) - Available on RH1, RH2, & RH3
for use in harshest environments. Add .08” to dia. & .18” to length.
P/N DESIGNATION:
RCD Type
RH2 - 1005 - F T 50 W
Options: P, H, B, 58, etc. (leave blank if std)
4-Digit Resis. Code 0.1%-1%: 1001=1K, 1002=10K, 1003=100K,
1004=1M, 1005=10M, 1006=100M, 1G00=1GΩ, 10G0=10G,
100G=100G, 1T00=1TΩ, 10T0=10T
3-Digit Resis. Code 2%-10%: 102=1K, 103=10K, 104=100K, 105=1M,
106=10M, 107=100M,1G0=1G, 10G=10G, 100G=100G,1T0=1TΩ, 10T=10T
Tolerance: J=5%,G=2%,F=1%,D=.5%,C=.25%,B=.1%,A=.05%
Packaging: B = Bulk, T = Tape & Reel
TC: 15=15ppm, 25 =25ppm, 50 =50ppm, 80 = 80ppm, 101 =100ppm,
201=200ppm, 351=350ppm, 401=400ppm, 102=1000ppm, 152=1500ppm)
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
SPECIFICATIONS (Typ.) RG Series
RH Series
RP Series
Operating Temp. Range
-55 to +155°C* -55 to +155°C* -55 to +225°C*
Tolerances
1%-10%, 0.1% avail
0.1%-5%
0.05%-5%
Coating
Epoxy
Epoxy
Silicone
Inductance
Low
Low
Non-Inductive
Overload (1.5xW, 5S, nte 1.5xV)
±1% ∆R
±0.5% ∆R
±0.25% ∆R
Load Life (1000 hours)
±2% ∆R
±0.5% ∆R
±0.4% ∆R
Moisture Resistance
±2% ∆R
±0.5% ∆R
±0.25% ∆R
Voltage Coefficient
<1GΩ
-10ppm/ V
-5ppm/ V
-0.3ppm/ V
(VC = ppm/V) 1GΩ - 10GΩ
-30ppm/ V
-20ppm/ V
-1.5ppm/ V
10G - 7TΩ
N/A
-100ppm/ V
-2ppm/ V
* Extended temperature range available ** Tinned copper leads avail. on Series RP (specify Opt.25)
DERATING
100
75
50
25
0
25
RP
RG,RH
50
75
100 125 150 175 200 225
AMBIENT TEMPERATURE (°C)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: [phone] Fax: [phone] Email:[e-mail]
FA036C Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
69