|
P01-1NS-50RBW Datasheet, PDF (1/1 Pages) RCD COMPONENTS INC. – PASSIVE SIP DELAY LINES, SINGLE OUTPUT | |||
|
PASSIVE SIP DELAY LINES, SINGLE OUTPUT
SMP01S - 4 PIN SM
P01S - 4 PIN DIP
RoHS
Term.W is
RoHS
compliant
RESISTORS CAPACITORS COILS DELAY LINES
P01 - 14 PIN DIP & SM
S01 - 3 PIN SIP
Industryâs widest range: 0.1nS to 1000nS
Low cost, prompt delivery!
Wide range of package styles
Detailed application handbook available
OPTIONS
Custom circuits, delay and/or impedance values
MIL-D-23859 screening
Increased operating temperature range
Low profile package (Type P01 only)
Tighter tolerance or temperature coefficient
Faster rise times
RCDâs passive delay lines are a lumped constant design,
incorporating high-performance inductors and multilayer
capacitors in a molded case ensuring stable transmission, low
temperature coefficient, and excellent environmental performance.
S01: ±5% or ±0.2nS (whichever is greater)
Total Delay Tolerance P01: ±5% or ±2nS (whichever is greater)
P01S/SMP01S: ±20%
Temperature Coefficient
±100ppm/°C Max.
Insulation Resistance
1000M⦠Min.
Dielectric Strength
100VDC
Distortion
±10% Max.
Operating Temp. Range 0 to70°C (Opt.39= -40 to 85°C, ER= -55 to125°C)
Operating Freq. (BW)
BW (MHz)=.35/(TR nS x 1000)
Attenuation: (dependent S01: 2%
on impedance, low values P01: 10nS-300nS 10% , >300nS 20%
have lower attenuation) P01S/SMP01S: 20%
RCD
Type
P01S &
SMP01S
Delay
Time, TD
(nS)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
Max. Rise
Time, TR *
(nS)
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
0.5
1.6
1.0
1.6
2.0
1.6
3.0
1.7
S01
4.0
1.7
5.0
1.8
6.0
2.0
7.0
2.2
8.0
2.4
9.0
2.6
10.0
2.8
10
3.5
20
5.5
30
6.5
40
8
50
10
60
12
P01,
75
15
P01A,
100
20
P01G,
120
24
P01AG
150
30
180
36
200
40
220
44
250
50
300
60
375
75
500
100
600
120
750
150
1000
200
* Faster rise times available on some models
Available
Impedance
Values (±10% )
50⦠or 75â¦
50⦠or 75â¦
50⦠or 75â¦
50⦠or 75â¦
50⦠or 75â¦
50⦠or 75â¦
50⦠or 75â¦
50⦠or 75â¦
50⦠or 75â¦
50⦠or 75â¦
55â¦, 93⦠or 100â¦
55â¦, 93⦠or 100â¦
55â¦, 93⦠or 100â¦
55â¦, 93⦠or 100â¦
55â¦, 93⦠or 100â¦
55â¦, 93⦠or 100â¦
55â¦, 93⦠or 100â¦
55â¦, 93⦠or 100â¦
55â¦, 93⦠or 100â¦
55â¦, 93⦠or 100â¦
55â¦, 93⦠or 100â¦
100â¦
50â¦, 100â¦, 200â¦
50â¦, 100â¦, 200â¦
50â¦, 100â¦, 200â¦, 300â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
50â¦, 100â¦, 200â¦, 300â¦, 500â¦
Type P01S 4-Pin DIP, Type SMP01S 4-Pin Surface Mount
4
3
P01S
â
.200 [5]
â
1
2
.236 [6]
.018 [.46]â â
â
.100 [2.54] â â .025[.6]
â â.010
0.300 [.254]
â [7.6] â
4
IN
3
OUT
4
3
SMP01S
1
2
.236 [6]
.24â0 [6]
Max.
.018 [.46]â â
â
.100 [2.54] â â
â.30 [7.6â]
â.4M2[a1x0..7]â
1
GND
2
GND
Type S01
3-Pin SIP
â.490 [12.5] max. â
â
â
.375 [9.5]
â .13 [3.3]
Max.
3
2
1
Max.
â
IN 1
â
â.02 [.5]
.100[2.54] Min.
â â.100 [2.54]
â .[370.602]â
ââ
.020 [.5]
â
2
GND
3 OUT
Type P01 (.300â Profile) & P01A (.200â)14-Pin DIP
â.800 [20.3] Max. â
SIDE VIEW
.300 [7.6]
max.(std),
.200 [5.1]
.015 â
Opt. A
[.3.082] 0ââ
[.5]
â
â
.600±.010
[15.2±.25]
.12 [3] min
âââ.10 [2.54]
.300±.01
[7.6±.25]
1
IN
14
GND
7
OUT
8
GND
Type P01G (.300â Profile) & P01AG (.200â) 14-Pin Surface Mount
â.800 [20.3] Max. â
.285 [7.24]
14
8
TOP VIEW
1
7
ââ
.020 [.5]
ââ
.10 [2.54]
.300 [7.6]
max.(std),
.015[.38] ââ
.200 [5.1]
Opt. A
â.300 [7.6]â
â.420[10.7]maxâ
1
IN
14
GND
7
OUT
8
GND
TEST CONDITIONS: Pulse width at 3x total delay, pulse input at
2.5V, delay measured at 25°C on leading edge with no loads
on output. Rise time measured at 10% to 90% points.
P/N DESIGNATION:
P01 - 10NS - 101 B W
RCD Type
Options: as assigned by RCD (leave blank if std.)
Delay Time (0.1NS, 1NS, 10NS, 100NS, 1000NS, etc)
Impedance: 50R=50â¦, 75R=75â¦, 101=100â¦, 201=200â¦, 301=300â¦, 501=500â¦
Packaging: B=Bulk (magazine tube is standard)
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
FA105 Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
110
|